/**
   ESP32 + DHT22 Example for Wokwi
   
   https://wokwi.com/arduino/projects/322410731508073042
*/

#include "DHTesp.h"
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);
RTC_DS1307 RTC;
char days[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};



const int DHT_PIN = 15;

DHTesp dhtSensor;

void setup() {

display.begin(SSD1306_SWITCHCAPVCC, 0x3c); //สั่งให้จอ OLED เริ่มทำงานที่ Address 0x3C
display.clearDisplay(); // ลบภาพในหน้าจอทั้งหมด
display.setTextSize(1); // กำหนดขนาดตัวอักษร
display.setTextColor(WHITE);
display.setCursor(0,0); // กำหนดตำแหน่ง x,y ที่จะแสดงผล
display.println(" OLED 0.96 TESTER ");

display.setCursor(0,10);
display.setTextSize(2);
display.setTextColor(BLACK, WHITE); //กำหนดข้อความสีขาว ฉากหลังสีดำ
display.println(" Myarduino");

display.setCursor(0,32);
display.setTextSize(1);
display.setTextColor(WHITE);
display.println("128 x 64 Pixels 0.96");

display.setCursor(0,48);
display.setTextSize(1);
display.setTextColor(WHITE);
display.println(" www.myarduino.net "); // แสดงผลข้อความ www.Myarduino.net
display.display();

  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
}

void loop() {
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  delay(1000);
}
GND5VSDASCLSQWRTCDS1307+