// ServoOverdone.ino
//
// Example for multiple Servo objects in a array.
//
// Version 1, 28 July 2021, by Koepel.
// Version 2, 15 August 2021, by Koepel.
//   changed timing, a little slower
//   diagram.json has servos in reverse order (I think it is visually better)
//   Added fourth sequence: "compass"
//
// Public Domain
//
𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛! Solo Leveling: ReAwakening 𝙾𝚗𝚕𝚒𝚗𝚎 𝚐𝚛𝚊𝚝𝚒𝚜 - 𝟸𝟶𝟸𝟺 - f𝚒𝚕𝚖𝚎 D𝚞𝚋𝚕𝚊𝚍𝚘 𝙻𝚎𝚐𝚎𝚗𝚍𝚊𝚍𝚘 𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛 f𝚒𝚕𝚖𝚎 Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 𝙷𝙳 𝟸𝟶𝟸𝟺 D𝚞𝚋𝚕𝚊𝚍𝚘 𝙴𝚖 𝙿𝚘𝚛𝚝𝚞𝚐𝚞𝚎𝚜 𝙾𝚗𝚕𝚒𝚗𝚎 𝚐𝚛𝚊𝚝𝚒𝚜 𝙱𝚊𝚒𝚡𝚊𝚛 Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 𝙾𝚗𝚕𝚒𝚗𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 𝚍𝚞𝚋𝚕𝚊𝚍𝚘 𝚎𝚖 𝚙𝚘𝚛𝚝𝚞𝚐𝚞ê𝚜 𝚖𝚎𝚐𝚊, 𝙰𝚜𝚜𝚒𝚜𝚝𝚊 𝚊 Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 𝚍𝚞𝚋𝚕𝚊𝚍𝚘 𝚎 𝚕𝚎𝚐𝚎𝚗𝚍𝚊𝚍𝚘 𝚎𝚖 𝙷𝙳 𝟽𝟸𝟶𝚙 𝙾𝚗𝚕𝚒𝚗𝚎 𝚐𝚛𝚊𝚝𝚒𝚜. 𝙲𝚘𝚖𝚘 𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛 f𝚒𝚕𝚖𝚎 Solo Leveling: ReAwakening 𝚍𝚞𝚋𝚕𝚊𝚍𝚘 𝚎𝚖 𝚙𝚘𝚛𝚝𝚞𝚐𝚞ê𝚜 𝚝𝚘𝚙𝚏𝚕𝚒𝚡 𝚍𝚎 𝚐𝚛𝚊ç𝚊?

➤►➤► 𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛 𝙰𝚐𝚘𝚛𝚊 ➤► https://is.gd/D8nDbr

03 𝚍𝚎 dezembro 𝚍𝚎 𝟸𝟶𝟸𝟺 𝙽𝚘 𝚌𝚒𝚗𝚎𝚖𝚊 | 𝟷𝚑 𝟻𝟻𝚖𝚒𝚗 | 𝙰çã𝚘, 𝙵𝚊𝚗𝚝𝚊𝚜𝚒𝚊, 𝙵𝚒𝚌çã𝚘 𝙲𝚒𝚎𝚗𝚝í𝚏𝚒𝚌𝚊

𝙳𝚒𝚛𝚎çã𝚘: 𝙰𝚍𝚊𝚖 𝚆𝚒𝚗𝚐𝚊𝚛𝚍 | 𝚁𝚘𝚝𝚎𝚒𝚛𝚘 𝚃𝚎𝚛𝚛𝚢 𝚁𝚘𝚜𝚜𝚒𝚘, 𝚂𝚒𝚖𝚘𝚗 𝙱𝚊𝚛𝚛𝚎𝚝𝚝.

𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛 Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 D𝚞𝚋𝚕𝚊𝚍𝚘 𝙴𝚖 𝙿𝚘𝚛𝚝𝚞𝚐𝚞𝚎𝚜 𝚝𝚘𝚙𝚏𝚕𝚒𝚡

Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘

Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 𝙷𝙳 𝟸𝟶𝟸𝟺

Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 D𝚞𝚋𝚕𝚊𝚍𝚘

Solo Leveling: ReAwakening f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 D𝚞𝚋𝚕𝚊𝚍𝚘 𝚃𝚘𝚙𝚏𝚕𝚒𝚡

Solo Leveling: ReAwakening– f𝚒𝚕𝚖𝚎 C𝚘𝚖𝚙𝚕𝚎𝚝𝚘 D𝚞𝚋𝚕𝚊𝚍𝚘 𝙰𝚜𝚜𝚒𝚜𝚝𝚒𝚛 𝚐𝚛𝚊𝚝𝚒𝚜
#include <Servo.h>

#define NUM_SERVOS 32
Servo myServo[NUM_SERVOS];

void setup() 
{
  // Attach pins from the Arduino Mega board to the Servo objects.
  // Starting from pin 22, there happen to be exactly 32 pins on the double row pins.
  for( int i=0; i<NUM_SERVOS; i++)
  {
    myServo[i].attach( i + 22);      // pin 22 up to 53 is 32 pins
  }
}

void loop() 
{
  // Sequence one.
  // All servo motor are set to a random angle.
  for( int a=0; a<15; a++)
  {
    for( int i=0; i<NUM_SERVOS; i++)
    {
      myServo[i].write( random( 0, 181));
      delay( 2);
    }
    delay( 150);
  }

  // Sequence two.
  // All servo motors move with the same angle.
  for( int i=0; i<NUM_SERVOS; i++)
  {
    myServo[i].write( 0);            // set to begin position (horn is rotated left)
  }
  delay( 1000);                      // wait to let the viewer get used to it

  for( int a=0; a<3; a++)
  {
    for( int r=0; r<=180; r++)       // move horns to the right
    {
      for( int i=0; i<NUM_SERVOS; i++)
      {
        myServo[i].write( r);
      }
      delay( 6);
    }
    for( int r=180; r>=0; r--)
    {
      for( int i=0; i<NUM_SERVOS; i++)  // move horns to the left
      {
        myServo[i].write( r);
      }
      delay( 6);
    }
  }

  // Sequence three.
  // A rotating wave.
  for( int a=0; a<6; a++)
  {
    for( int i=0; i<NUM_SERVOS; i++)
    {
      for( int j=0; j<NUM_SERVOS; j++)
      {
        // Calculate distance to active servo
        int d = j - i;
        if( d < 0)
          d = -d;
        if( d > (NUM_SERVOS / 2))
          d = NUM_SERVOS - d;

        int angle = 90 - (10 * d);
        if( angle < 0)
          angle = 0;
        myServo[j].write( angle);
      }
      delay(40);
    }
  }

  // Sequence four.
  // A "compass"
  // Start by pointing upwards
  int pointer = NUM_SERVOS * 3 / 4;
  showPointer( pointer);
  delay( 1000);                       // let the viewer get used to new pattern

  for( int i=0; i<5; i++)
  {
    showPointer( --pointer);
    delay( 150);
  }
  delay( 200);
  for( int i=0; i<9; i++)
  {
    showPointer( ++pointer);
    delay( 150);
  }
  delay( 200);
  for( int i=0; i<5; i++)
  {
    showPointer( --pointer);
    delay( 150);
  }
  delay( 200);
  for( int i=0; i<4; i++)
  {
    showPointer( ++pointer);
    delay( 150);
  }
  delay( 160);
  for( int i=0; i<2; i++)
  {
    showPointer( --pointer);
    delay( 150);
  }
  delay( 80);
  for( int i=0; i<1; i++)
  {
    showPointer( ++pointer);
    delay( 150);
  }

  delay( 2000);
}

// This function makes a "pointer" with the servos.
// It is used to create the "compass".
// The parameter 's' is the servo motor that has the pointer.
// It is allowed that 's' is below zero or larger than the numbers of servo motors.
void showPointer( int s)
{
  int pointerA = s % NUM_SERVOS;        // Using the '%' (remainder) for valid number
  int pointerB = (s + 1) % NUM_SERVOS;  // pointer is made with the next servo motor
  int tailA = (s + 16) % NUM_SERVOS;
  int tailB = (s + 17) % NUM_SERVOS;

  // make pointer with servo motor s and s+1.
  myServo[pointerA].write(180-56);
  myServo[pointerB].write(56);

  // make tail with servo motor s+16 and s+17.
  myServo[tailA].write(95);
  myServo[tailB].write(85);

  // Set servos right of pointer
  int n = (NUM_SERVOS / 2) - 2;
  int start = pointerB + 1;
  for( int i=0; i<n; i++)
  {
    int j = (start + i) % NUM_SERVOS;
    myServo[j].write( 2);
  }

  // Set servos left of pointer
  start = tailB + 1;
  for( int i=0; i<n; i++)
  {
    int j = (start + i) % NUM_SERVOS;
    myServo[j].write( 178);
  }
}

// The function GenerateDiagram() can be used to generate
// the diagram.json file for Wokwi.
// To use it, call it from the setup() function, and the
// serial output can be copied into the diagram.json file.
void GenerateDiagram()
{
  Serial.begin(115200);

  Serial.print( "{\n");
  Serial.print( "  \"version\": 1,\n");
  Serial.print( "  \"author\": \"Generated\",\n");
  Serial.print( "  \"editor\": \"wokwi\",\n");
  Serial.print( "  \"parts\": [\n");

  Serial.print( "    {\n");
  Serial.print( "      \"type\": \"wokwi-arduino-mega\",\n");
  Serial.print( "      \"id\": \"mega\",\n");
  Serial.print( "      \"top\": 270,\n");
  Serial.print( "      \"left\": 185,\n");
  Serial.print( "      \"attrs\": {}\n");
  Serial.print( "    },\n");

  // Put the servo motor in reverse order in the diagram.json
  // I think that is visually better.
  // The horn now overlaps the next servo when the horn moves to the right.
  for( int i=NUM_SERVOS-1; i>=0; i--)
  {
    float rotate = float( i) * (360.0 / float( NUM_SERVOS));
    float rad = rotate / 360.0 * 2.0 * M_PI;
    float top = (300.0 * sin( rad)) + 300.0;
    float left = (300.0 * cos( rad)) + 300.0;
    Serial.print( "    {\n");
    Serial.print( "      \"type\": \"wokwi-servo\",\n");
    Serial.print( "      \"id\": \"servo");
    Serial.print( i);
    Serial.print( "\",\n");
    Serial.print( "      \"top\": ");
    Serial.print( top);
    Serial.print( ",\n");
    Serial.print( "      \"left\": ");
    Serial.print( left);
    Serial.print( ",\n");
    Serial.print( "      \"rotate\": ");
    Serial.print( rotate);
    Serial.print( ",\n");
    Serial.print( "      \"attrs\": { \"hornColor\": \"Red\" }\n");
    Serial.print( "    }");
    if( i != 0)
      Serial.print( ",");
    Serial.print( "\n");
  } 

  Serial.print( "  ],\n");
  Serial.print( "  \"connections\": [\n");

  for( int i=0; i<NUM_SERVOS; i++)
  {
    int j = i + 1;
    if( j == NUM_SERVOS)
      j = 0;
    Serial.print( "    [ \"servo");
    Serial.print( i);
    Serial.print( ":V+\", \"servo");
    Serial.print( j);
    Serial.print( ":V+\", \"Red\", [] ],\n");
    Serial.print( "    [ \"servo");
    Serial.print( i);
    Serial.print( ":GND\", \"servo");
    Serial.print( j);
    Serial.print( ":GND\", \"Black\", [] ],\n");

    Serial.print( "    [ \"mega:");
    Serial.print( i + 22);
    Serial.print( "\", \"servo");
    Serial.print( i);
    Serial.print( ":PWM\", \"Green\", [ ] ],\n");
  }
  Serial.print( "    [ \"mega:GND.2\", \"servo9:GND\", \"Black\", [ ] ],\n");
  Serial.print( "    [ \"mega:5V\", \"servo9:V+\", \"Red\", [ ] ]\n");

  Serial.print( "  ]\n");
  Serial.print( "}\n");
}