#include <WiFi.h>
#include <HTTPClient.h>
#include <DHTesp.h>
#include <ESP32Servo.h>

const char* ssid = "Wokwi-GUEST";
const char* password = "";

const char* webhook = "https://hook.us2.make.com/61kkoma4zm8ti26tyve97vk8m8u5vvmf";

// Sensores
#define LDR_PIN 34
#define PIR_PIN 27
#define DHT_PIN 15

// LEDs
#define LED1 2
#define LED2 4
#define LED3 5

// Servo
#define SERVO_PIN 18

Servo servo;
DHTesp dht;

void setup() {

  Serial.begin(115200);

  pinMode(LDR_PIN, INPUT);
  pinMode(PIR_PIN, INPUT);

  pinMode(LED1, OUTPUT);
  pinMode(LED2, OUTPUT);
  pinMode(LED3, OUTPUT);

  dht.setup(DHT_PIN, DHTesp::DHT22);

  servo.attach(SERVO_PIN);
  servo.write(0);

  WiFi.begin(ssid, password);

  Serial.print("Conectando");

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println();
  Serial.println("WiFi conectado!");

}

void loop() {

  int ldr = analogRead(LDR_PIN);

  int pir = digitalRead(PIR_PIN);

  TempAndHumidity dhtData = dht.getTempAndHumidity();

  float temp = dhtData.temperature;
  float hum = dhtData.humidity;

  // LED LDR

  digitalWrite(LED1, ldr < 2000);

  // LED Temperatura

  digitalWrite(LED2, temp < 30);

  // Movimento

  if (pir == HIGH) {

    digitalWrite(LED3, HIGH);
    servo.write(90);

  } else {

    digitalWrite(LED3, LOW);
    servo.write(0);

  }

  String json = "{";
  json += "\"luminosidade\":" + String(ldr) + ",";
  json += "\"movimento\":" + String(pir) + ",";
  json += "\"temperatura\":" + String(temp,1) + ",";
  json += "\"umidade\":" + String(hum,1);
  json += "}";

  Serial.println(json);

  if (WiFi.status() == WL_CONNECTED) {

    HTTPClient http;

    http.begin(webhook);

    http.addHeader("Content-Type", "application/json");

    int httpCode = http.POST(json);

    Serial.print("HTTP: ");
    Serial.println(httpCode);

    http.end();

  }

  delay(5000);

}