/**
   Mini piano for Arduino.

   You can control the colorful buttons with your keyboard:
   After starting the simulation, click anywhere in the diagram to focus it.
   Then press any key between 1 and 8 to play the piano (1 is the lowest note,
   8 is the highest).

   Copyright (C) 2021, Uri Shaked. Released under the MIT License.
*/

#include "pitches.h"

#define SPEAKER_PIN 8

const uint8_t buttonPins[] = { 12, 11, 10, 9, 7, 6, 5, 4 };
const int buttonTones[] = {
  NOTE_C4, NOTE_D4, NOTE_E4, NOTE_F4,
  NOTE_G4, NOTE_A4, NOTE_B4, NOTE_C5
};
const int numTones = sizeof(buttonPins) / sizeof(buttonPins[0]);

void setup() {
  for (uint8_t i = 0; i < numTones; i++) {
    pinMode(buttonPins[i], INPUT_PULLUP);
  }
  pinMode(SPEAKER_PIN, OUTPUT);
}

void loop() {
  int pitch = 0;
  for (uint8_t i = 0; i < numTones; i++) {
    if (digitalRead(buttonPins[i]) == LOW) {
      pitch = buttonTones[i];
    }
  }
  if (pitch) {
    tone(SPEAKER_PIN, pitch);
  } else {
    noTone(SPEAKER_PIN);
  }
}
uno:A5.2
uno:A4.2
uno:AREF
uno:GND.1
uno:13
uno:12
uno:11
uno:10
uno:9
uno:8
uno:7
uno:6
uno:5
uno:4
uno:3
uno:2
uno:1
uno:0
uno:IOREF
uno:RESET
uno:3.3V
uno:5V
uno:GND.2
uno:GND.3
uno:VIN
uno:A0
uno:A1
uno:A2
uno:A3
uno:A4
uno:A5
buzzer:1
buzzer:2
btn1:1.l
btn1:2.l
btn1:1.r
btn1:2.r
btn2:1.l
btn2:2.l
btn2:1.r
btn2:2.r
btn3:1.l
btn3:2.l
btn3:1.r
btn3:2.r
btn4:1.l
btn4:2.l
btn4:1.r
btn4:2.r
btn5:1.l
btn5:2.l
btn5:1.r
btn5:2.r
btn6:1.l
btn6:2.l
btn6:1.r
btn6:2.r
btn7:1.l
btn7:2.l
btn7:1.r
btn7:2.r
btn8:1.l
btn8:2.l
btn8:1.r
btn8:2.r