#include <DHT.h> 
#define DHTPIN 8 
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27,16,2);
int LED1 = 4;
int LED2 = 5;
void setup() {
  Serial.begin(9600);     
  Serial.println("DHT11 test");
  dht.begin();
  lcd.init();           lcd.backlight();
  pinMode(LED1,OUTPUT); pinMode(LED2,OUTPUT);    
}
void loop() {
  delay(1000);
  float h = dht.readHumidity();       
  float t = dht.readTemperature();
  if (isnan(t)||  isnan(h)){
      Serial.println("Failed to read from DHT ");
  }
  else {
      Serial.print("Humidity: ");    Serial.print(h);          Serial.print(" %╲t");
      lcd.setCursor(0,0);   lcd.print("Humi: ");
      lcd.setCursor(7,0);   lcd.print(h);
      lcd.setCursor(15,0);  lcd.print("%");
      Serial.print("Temperature: ");    Serial.print(t);          Serial.println(" C");
      lcd.setCursor(0,1);   lcd.print("Temp = ");
      lcd.setCursor(7,1);   lcd.print(t);
      lcd.setCursor(15,1);  lcd.print("C");
      if((h >= 75)|| (t >=36)){
         digitalWrite(LED1,LOW);
         digitalWrite(LED2,HIGH);
        }                                                                                           
        else{
          digitalWrite(LED1,HIGH);
          digitalWrite(LED2,LOW);
        }     
  }
}