int led_pin = 11;
int switch_1 = 7;
int switch_2 = 6;
//int A_pin = A0;  //A0 je analogni pin na arduinu

void setup() {
  pinMode(led_pin, OUTPUT);
  digitalWrite(led_pin, LOW);
  Serial.begin(9600);
  //Serial.println("Pozdravljen, kolega!");

  pinMode(switch_1, INPUT_PULLUP);
  pinMode(switch_2, INPUT_PULLUP);
  //pinMode(A_pin, INPUT);

}
void loop() {
  if(digitalRead(switch_1) == HIGH && digitalRead(switch_2) == HIGH){
    digitalWrite(led_pin, LOW);
 
  }
  if(digitalRead(switch_1) == HIGH && digitalRead(switch_2) == LOW ){
  digitalWrite(led_pin, HIGH);
 
  }
  if(digitalRead(switch_1) == LOW && digitalRead(switch_2) == HIGH ){
  digitalWrite(led_pin, HIGH);
 
  }

  if(digitalRead(switch_1) == LOW && digitalRead(switch_2) == LOW){
    digitalWrite(led_pin, LOW);
}}