/*
MIT License
Copyright (c) 2019-2020, Alexey Dynda
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/
/**
Nano/Atmega328 PINS: connect LCD to D5 (D/C), D4 (CS), D3 (RES), D11(DIN), D13(CLK)
Attiny SPI PINS: connect LCD to D4 (D/C), GND (CS), D3 (RES), D1(DIN), D2(CLK)
ESP8266: connect LCD to D1(D/C), D2(CS), RX(RES), D7(DIN), D5(CLK)
*/
/* !!! THIS DEMO RUNS in FULL COLOR MODE */
#include "lcdgfx.h"
#include "lcdgfx_gui.h"
#include "owl.h"
DisplayIL9163_128x128x16_SPI display(3, {-1, 4, 5, 0, -1, -1}); // Use this line for Atmega328p
//DisplayIL9163_128x128x16_SPI display(3,{-1, -1, 4, 0, -1, -1}); // FOR ATTINY
//DisplayIL9163_128x128x16_SPI display(-1,{-1, 0, 1, 0, -1, -1); // Use this line for nano pi (RST not used, 0=CE, gpio1=D/C)
//DisplayIL9163_128x128x16_SPI display(24,{-1, 0, 23, 0,-1,-1}); // Use this line for Raspberry (gpio24=RST, 0=CE, gpio23=D/C)
//DisplayIL9163_128x128x16_SPI display(22,{-1, 5, 21, 0,-1,-1}); // Use this line for ESP32 (VSPI) (gpio22=RST, gpio5=CE for VSPI, gpio21=D/C)
//DisplayIL9163_128x128x16_SPI display(4,{-1, -1, 5, 0,-1,-1}); // Use this line for ESP8266 Arduino style rst=4, CS=-1, DC=5
// And ESP8266 RTOS IDF. GPIO4 is D2, GPIO5 is D1 on NodeMCU boards
/*
Heart image below is defined directly in flash memory.
This reduces SRAM consumption.
The image is defined from bottom to top (bits), from left to
right (bytes).
*/
const PROGMEM uint8_t heartImage[8] = {
0B00001110,
0B00011111,
0B00111111,
0B01111110,
0B01111110,
0B00111101,
0B00011001,
0B00001110
};
const PROGMEM uint8_t heartImage8[ 8 * 8 ] = {
0x00, 0xE0, 0xE0, 0x00, 0x00, 0xE5, 0xE5, 0x00,
0xE0, 0xC0, 0xE0, 0xE0, 0xE0, 0xEC, 0xEC, 0xE5,
0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE5, 0xEC, 0xE5,
0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE5, 0xE0,
0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00,
0x00, 0x00, 0x80, 0xE0, 0xE0, 0xE0, 0x00, 0x00,
0x00, 0x00, 0x00, 0x80, 0xE0, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
const char *menuItems[] = {
"draw bitmap",
"sprites",
"fonts",
"nano canvas",
"draw lines",
};
LcdGfxMenu menu( menuItems, sizeof(menuItems) / sizeof(char *) );
static void bitmapDemo() {
display.setColor(RGB_COLOR16(64, 64, 255));
display.drawBitmap1(0, 0, 128, 64, Owl);
display.drawBitmap8(0, 0, 8, 8, heartImage8);
display.setColor(RGB_COLOR16(255, 64, 64));
display.drawBitmap1(0, 16, 8, 8, heartImage);
lcd_delay(3000);
}
/* Sprites are not implemented for color modes.
But there is NanoEngine support
To make example clear, we use lambda as function pointer. Since lambda can be
passed to function only if it doesn't capture, all variables should be global.
Refer to C++ documentation.
*/
NanoPoint sprite;
NanoEngine16<DisplayIL9163_128x128x16_SPI> engine( display );
static void spriteDemo() {
// We not need to clear screen, engine will do it for us
engine.begin();
// Force engine to refresh the screen
engine.refresh();
// Set function to draw our sprite
engine.drawCallback( []()->bool {
engine.getCanvas().clear();
engine.getCanvas().setColor( RGB_COLOR16(255, 32, 32) );
engine.getCanvas().drawBitmap1( sprite.x, sprite.y, 8, 8, heartImage );
return true;
} );
sprite.x = 0;
sprite.y = 0;
for (int i = 0; i < 250; i++) {
lcd_delay(15);
// Tell the engine to refresh screen at old sprite position
engine.refresh( sprite.x, sprite.y, sprite.x + 8 - 1, sprite.y + 8 - 1 );
sprite.x++;
if (sprite.x >= display.width()) {
sprite.x = 0;
}
sprite.y++;
if (sprite.y >= display.height()) {
sprite.y = 0;
}
// Tell the engine to refresh screen at new sprite position
engine.refresh( sprite.x, sprite.y, sprite.x + 8 - 1, sprite.y + 8 - 1 );
// Do refresh required parts of screen
engine.display();
}
}
static void textDemo() {
display.setFixedFont(ssd1306xled_font6x8);
display.clear();
display.setColor(RGB_COLOR16(255, 255, 0));
display.printFixed(0, 8, "Normal text", STYLE_NORMAL);
display.setColor(RGB_COLOR16(0, 255, 0));
display.printFixed(0, 16, "bold text?", STYLE_BOLD);
display.setColor(RGB_COLOR16(0, 255, 255));
display.printFixed(0, 24, "Italic text?", STYLE_ITALIC);
display.setColor(RGB_COLOR16(255, 255, 255));
display.invertColors();
display.printFixed(0, 32, "Inverted bold?", STYLE_BOLD);
display.invertColors();
lcd_delay(3000);
}
static void canvasDemo() {
NanoCanvas<64, 16, 1> canvas;
display.setColor(RGB_COLOR16(0, 255, 0));
display.clear();
canvas.clear();
canvas.fillRect(10, 3, 80, 5);
display.drawCanvas((display.width() - 64) / 2, 1, canvas);
lcd_delay(500);
canvas.fillRect(50, 1, 60, 15);
display.drawCanvas((display.width() - 64) / 2, 1, canvas);
lcd_delay(1500);
canvas.setFixedFont(ssd1306xled_font6x8);
canvas.printFixed(20, 1, " DEMO ", STYLE_BOLD );
display.drawCanvas((display.width() - 64) / 2, 1, canvas);
lcd_delay(3000);
}
static void drawLinesDemo() {
display.clear();
display.setColor(RGB_COLOR16(255, 0, 0));
for (uint8_t y = 0; y < display.height(); y += 8) {
display.drawLine(0, 0, display.width() - 1, y);
}
display.setColor(RGB_COLOR16(0, 255, 0));
for (uint8_t x = display.width() - 1; x > 7; x -= 8) {
display.drawLine(0, 0, x, display.height() - 1);
}
lcd_delay(3000);
}
void setup() {
display.begin();
display.setFixedFont(ssd1306xled_font6x8);
display.fill( 0x0000 );
menu.show( display );
}
uint8_t rotation = 0;
void loop() {
lcd_delay(1000);
switch (menu.selection()) {
case 0:
bitmapDemo();
break;
case 1:
spriteDemo();
break;
case 2:
textDemo();
break;
case 3:
canvasDemo();
break;
case 4:
drawLinesDemo();
break;
default:
break;
}
if ((menu.size() - 1) == menu.selection()) {
display.getInterface().setRotation((++rotation) & 0x03);
}
display.fill( 0x00 );
display.setColor(RGB_COLOR16(255, 255, 255));
menu.show( display );
lcd_delay(500);
menu.down();
menu.show( display );
}