'''
Lecture d'un capteur de température/humidité DHT22
avec un Raspberry Pi Pico.
Calcul du point de rosée et de l'humidex.
Pour plus d'informations:
https://electroniqueamateur.blogspot.com/2021/06/mesurer-la-temperature-et-lhumidite.html
'''

from machine import Pin,
from DHT22 import DHT22  #https://github.com/danjperron/PicoDHT22
import time
import math
import dht
time.sleep_ms(1000) # on laisse le capteur se stabiliser

dht_22 = dht.DHT22(Pin(15))

while True:
    sens = dht_22.measure()
    temp = dht_22.temperature()
    hum = dht_22.humidity()
    print("Humidité: ", hum)
    print("Temperature: ", temp)
    


main.py

diagram.json

'''
 *
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2021 Daniel Perron
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
'''

import utime
import rp2
from rp2 import PIO, asm_pio
from machine import Pin

#
#     A     B   C   D   E   F
#          ___     ___     ...
#     ____/   \___/   \___/   \
#
#     A = start pulse (> 1ms )
#     B = 2-40 us 
#     C = 80 us
#     D = 80 us
#
#     E and F are  data clock
#
#     E = 50 us
#     F =  26-28 us => 0    70 us => 1
#

    
@asm_pio(set_init=(PIO.OUT_HIGH),autopush=True, push_thresh=8)
def DHT22_PIO():
    # clock set at 500Khz  Cycle is 2us
    # drive output low for at least 20ms
    set(y,1)                    # 0
    pull()                      # 1
    mov(x,osr)                  # 2
    set(pindirs,1)              # 3 set pin to output
    set(pins,0)                 # 4 set pin low
    label ('waitx')
    jmp(x_dec,'waitx')          # 5 decrement x reg every 32 cycles
    set(pindirs,0)              # 6 set pin to input 
    # STATE A. Wait for high at least 80us. max should be  very short
    set(x,31)                   # 7 
    label('loopA')
    jmp(pin,'got_B')            # 8
    jmp(x_dec,'loopA')          # 9
    label('Error')
    in_(y,1)                    # 10
    jmp('Error')                # 11  Infinity loop error

    # STATE B. Get HIGH pulse. max should be 40us
    label('got_B')
    set(x,31)                   # 12
    label('loop_B')
    jmp(x_dec,'check_B')        # 13
    jmp('Error')                # 14
    label('check_B') 
    jmp(pin,'loop_B')           # 15
 
    # STATE C. Get LOW pulse. max should be 80us
    set(x,31)                   # 16
    label('loop_C')
    jmp(pin,'got_D')            # 17     
    jmp(x_dec,'loop_C')         # 18
    jmp('Error')                # 19
    
    # STATE D. Get HIGH pulse. max should be 80us
    label('got_D')
    set(x,31)                   # 20
    label('loop_D')
    jmp(x_dec,'check_D')        # 21
    jmp('Error')                # 22
    label('check_D')
    jmp(pin,'loop_D')           # 23
    
    # STATE E. Get Low pulse delay. should be around 50us
    set(x,31)                   # 24
    label('loop_E')
    jmp(pin,'got_F')            # 25
    jmp(x_dec,'loop_E')         # 26
    jmp('Error')                # 27
   
    # STATE F.
    # wait 40 us
    label('got_F')              
    nop() [20]                  # 28
    in_(pins,1)                 # 29
    # now wait for low pulse
    set(x,31)                   # 30
    jmp('loop_D')               # 31    




class DHT22:
    
    def __init__(self,dataPin, powerPin=None,dht11=False,smID=1):
        self.dataPin = dataPin
        self.powerPin = powerPin
        self.dht11 = dht11
        self.smID = smID
        self.dataPin.init(Pin.IN, Pin.PULL_UP)
        if self.powerPin is not None:
            self.powerPin.init(Pin.OUT)
            self.powerPin.value(0)
        self.sm= rp2.StateMachine(self.smID)
        




    def read_array(self):
        if self.powerPin is not None:
            self.powerPin.value(1)
            utime.sleep_ms(800)
        utime.sleep_ms(200)
        #start state machine
        self.sm.init(DHT22_PIO,freq=500000,
                     set_base=self.dataPin,
                     in_base=self.dataPin,
                     jmp_pin=self.dataPin)
        if self.dht11:
            self.sm.put(10000)
        else:
            self.sm.put(1000)
        self.sm.active(1)
        value = []
        for i in range(5):
            value.append(self.sm.get())
        self.sm.active(0)
        if self.powerPin is not None:
            self.powerPin.value(0)
        return value
 
    def read(self):
        value = self.read_array()
        sumV = 0
        for i in range(4):
            sumV += value[i]
        if (sumV & 0xff) == value[4]:
            if self.dht11:
                humidity=value[0] & 0x7f
                temperature=value[2] 
            else:                
                humidity=((value[0]<<8)  + value[1])/10.0
                temperature=(((value[2] &0x7f) << 8)  + value[3]) /10.0 
            if (value[2] & 0x80) == 0x80:
                temperature = -temperature            
            return temperature, humidity
        else:
            return None, None