#include "OneButton.h"

#define BTN1_PIN 2
#define BTN2_PIN A0

#define ACTIVE_LOW true
#define ACTIVE_HIGH false
#define PULLUP_ENABLE true
#define PULLUP_DISABLE false


// 按钮低有效，开启内部拉高
OneButton button1(BTN1_PIN, ACTIVE_LOW, PULLUP_ENABLE);
// OneButton button(BTN_PIN, true, true);
// 第二个参数：true 低有效； false 高有效
// 第三个参数：true 开启内部拉高； false 关闭内部拉高

// 按钮高有效，关闭内部拉高
OneButton button2(BTN2_PIN, ACTIVE_HIGH, PULLUP_DISABLE);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);

  button1.setDebounceTicks(50); // 按钮去抖动50毫秒

  // 单击，双击，三连击，N连击
  button1.setClickTicks(500); //时间判定 500毫秒 半秒
  button1.attachClick(singleClick1);
  button1.attachDoubleClick(doubleClick1);
  button1.attachMultiClick(multiClick1);


  // 1000ms后，开启长按
  button1.setPressTicks(800); //长按时间判定 800毫秒后算长按
  button1.attachLongPressStart(longPressStart1);
  button1.attachLongPressStop(longPressStop1);
  button1.attachDuringLongPress(longPress1);

}


void loop() {

  button1.tick();
  button2.tick();

}

// 单击
void singleClick1() {
  Serial.println("Single Click");
} // click1


// 双击
void doubleClick1() {
  Serial.println("Double Click");
} // doubleclick1


// This function will be called once, when the button1 is pressed for a long time.
void longPressStart1() {
  Serial.println("Button 1 longPress start");
} // longPressStart1


// This function will be called often, while the button1 is pressed for a long time.
void longPress1() {
  Serial.println("Button 1 longPress...");
} // longPress1


// This function will be called once, when the button1 is released after beeing pressed for a long time.
void longPressStop1() {
  Serial.println("Button 1 longPress stop");
} // longPressStop1

void multiClick1() {
  int n = button1.getNumberClicks();
  switch (n) {
    case 3:
      Serial.println("Triple Click");
      break;
    case 4:
      Serial.println("Quadruple Click");
      break;
    default:
      Serial.print("multiClick(");
      Serial.print(n);
      Serial.println(") detected.");
      break;
  };
}