#include <WiFi.h>
#include <PubSubClient.h>
#include "DHTesp.h"
const int DHT_PIN = 15;
DHTesp dhtSensor;
const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "test.mosquitto.org";
const char* mqtt_topic_suhu = "/Anggara/Temperature";
const char* mqtt_topic_kelembaban = "/Anggara/Humidity";
WiFiClient espClient;
PubSubClient client(espClient);
unsigned long lastMsg = 0;
#define MSG_BUFFER_SIZE (50)
float temp = 0;
float hum = 0;
int value = 0;
void setup_wifi() {
delay(10);
// We start by connecting to a WiFi network
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void callback(char* topic, byte* payload, unsigned int length) {
Serial.print("Message arrived [");
Serial.print(topic);
Serial.print("] ");
for (int i = 0; i < length; i++) {
Serial.print((char)payload[i]);
}
Serial.println();
}
void reconnect() {
// Loop until we're reconnected
while (!client.connected()) {
Serial.print("Attempting MQTT connection...");
// Create a random client ID
String clientId = "ESP8266Client-";
clientId += String(random(0xffff), HEX);
// Attempt to connect
if (client.connect(clientId.c_str())) {
Serial.println("Connected");
// Once connected, publish an announcement...
client.publish("/indobot/mqtt", "Indobot");
// ... and resubscribe
client.subscribe("/indobot/mqtt");
} else {
Serial.print("failed, rc=");
Serial.print(client.state());
Serial.println(" try again in 5 seconds");
// Wait 5 seconds before retrying
delay(5000);
}
}
}
void setup() {
pinMode(2, OUTPUT); // Initialize the BUILTIN_LED pin as an output
Serial.begin(115200);
setup_wifi();
client.setServer(mqtt_server, 1883);
client.setCallback(callback);
dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
}
void loop() {
if (!client.connected()) {
reconnect();
}
client.loop();
unsigned long now = millis();
if (now - lastMsg > 2000) {
lastMsg = now;
TempAndHumidity data = dhtSensor.getTempAndHumidity();
String temp = String(data.temperature, 2);
Serial.print("Temperature: ");
Serial.println(temp);
client.publish(mqtt_topic_suhu, temp.c_str());
String hum = String(data.humidity, 1);
Serial.print("Humidity: ");
Serial.println(hum);
client.publish(mqtt_topic_kelembaban, hum.c_str());
}
}