const int igpin=27,sosb=8,Ang1=A0,Ang2=A1,mbPin=A2,ibPin=A3;
const int8_t do1pin=22,do2pin=23,do3pin=30,do4pin=31;

const int8_t m66Pin=6,gsmwakeup=1,gwakeup=7,rMCU=2;
const int8_t BzDoTm=4,BtOFsatus=5,rlyDo=3;
byte wAng1=0,wAng2=0,do1p=0,do2p=0,do3p=0,do4p=0;
byte wib=0,wmb=0,wig=0,wpan=0,wBox=0;
void setup() {
  DDRH=B00010000; 
  DDRE=B00101000;
  DDRA=B01000000; 
  DDRL=B10100100;
  DDRG=B00000010;
  DDRC=B00011000; 
  Serial.begin(112500);
}
void loop() {
  wireConn();
  ExtraPinStatus();
}
void wireConn(){ 
 //wig = digitalRead(igpin);
  wig = (PINA >> 5 & B00100000 >> 5); 

 //wpan = digitalRead(sosb);      
  wpan = (PINH >> 5 & B00100000 >> 5);    
  
  //wBox = digitalRead(BzDoTm); 
  wBox = (PINL >> 4 & B00010000 >> 4);

  wAng1 = analogRead(Ang1);
  //wAng1 = (PINF >> 0 & B00000001 >> 0);

  wAng2 = analogRead(Ang2);          
 
  //do1p = digitalRead(do1pin);
  do1p = (PINA >> 2 & B00000010 >> 2); 
  
  do2p = digitalRead(do2pin); 
  
  //do3p = digitalRead(do3pin); 
  do3p = (PINC >> 7 & B10000000 >> 7);   
  
  //do4p = digitalRead(do4pin); 
  do4p = (PINC >> 6 & B01000000 >> 6);   
  
  Serial.print("Igni:  ");           //PORTA Pin-5     (27)
  Serial.print("Panic:  ");          //PORTH Pin-5     (8)
  Serial.print("Box :   ");          //PORTL Pin-4     (39)       
  Serial.print("Ang1:   ");          //PORTF Pin-0      (A0)
  Serial.print("Ang2:   ");          //PORTF Pin-1      (A1)
  //Serial.print("Ang3:   ");        //PORTF Pin-2      (A2)
  //Serial.print("Ang4:   ");        //PORTF Pin-3      (A3)
  Serial.println("Digital:   ");     //PORTA & PORTC  Pin-1,0 || 7,6  (22,23,30,31)
  
  Serial.print(wig); Serial.print('\t');
  Serial.print(wpan); Serial.print('\t');
  Serial.print(wBox); Serial.print('\t');
  Serial.print(wAng1); Serial.print('\t');
  Serial.print(wAng2);Serial.print('\t');
  Serial.print(do1p); Serial.print(do2p); Serial.print(do3p); Serial.println(do4p);
  delay(600);
}
 void ExtraPinStatus(){
  delay(500); 
  Serial.print("BZU:  ");         //PORTH  Pin-4        (7)
  Serial.print("REL:  ");         //PORTE  Pin-3        (5)
  Serial.print("M66:   ");        //PORTA  Pin-6        (28)
  Serial.print("BS-ON:   ");      //PORTL  Pin-5        (44)
  Serial.print("CHR-ON:   ");     //PORTE  Pin-5        (3)
  Serial.print("GSM:   ");        //PORTG  Pin-1        (40)
  Serial.print("GPS:   ");        //PORTL  Pin-7        (42)
  Serial.print("Rst:   ");        //PORTL  Pin-2        (47)
  Serial.println("DOTU:   ");     //PORTC  Pin-4 & 3    (33,34)
  fasterPort(BzDoTm, 1);
  fasterPort(rlyDo, 3);
  fasterPort(m66Pin, 5);
  fasterPort(BtOFsatus, 10);
  fasterPort(BtOFsatus, 12);
  fasterPort(gsmwakeup, 7);
  fasterPort(gwakeup, 9);
  fasterPort(rMCU, 18);
  delay(1000);
  Serial.println("--------------------------OFF--------------------------"); 
  fasterPort(BzDoTm, 2);
  fasterPort(rlyDo, 4);
  fasterPort(m66Pin, 6);
  fasterPort(BtOFsatus, 11);
  fasterPort(BtOFsatus, 13);
  fasterPort(gsmwakeup, 8);
  fasterPort(gwakeup, 0);
  fasterPort(rMCU, 19);
}
void fasterPort(const uint8_t nPin, byte j){
  TCCR1A =0;
  TCCR1B =bit(CS21);
  TCNT1 =0;
 //if(j==1){ PORTH >> 4 & bit(B00010000)>> 4;Serial.println("Buz H");}if(j==2){ PORTH >> 4 & bit(B00000000)>> 4;Serial.println("Buz L");}//digitalWrite(buz, HIGH);
 if(j==1){ PORTH = bit(nPin);}if(j==2){ PORTH = ~bit(nPin);}//digitalWrite(rly, HIGH);
 if(j==3){ PORTE = bit(nPin);}if(j==4){ PORTE = ~bit(nPin);}//digitalWrite(rly, HIGH);
 if(j==5){ PORTA = bit(nPin);}if(j==6){ PORTA = ~bit(nPin);}//digitalWrite(m66Pin, HIGH);
 if(j==7){ PORTG = bit(nPin);}if(j==8){ PORTG = ~bit(nPin);}//digitalWrite(gsmwakeup, HIGH);
 if(j==9){ PORTL = bit(nPin);}if(j==0){ PORTL = ~bit(nPin);}//digitalWrite(gsmwakeup, HIGH);
 if(j==10){ PORTL = bit(nPin);}if(j==11){PORTL = ~bit(nPin);}//digitalWrite(iStatus, HIGH);
 if(j==12){ PORTE = bit(nPin);}if(j==13){PORTE = ~bit(nPin);}//digitalWrite(BtONOF, HIGH);
 if(j==14){ PORTC = bit(nPin);}if(j==15){PORTC = ~bit(nPin);}//digitalWrite(do5pin, HIGH);
 if(j==16){ PORTC = bit(nPin);}if(j==17){PORTC = ~bit(nPin);}//digitalWrite(do6pin, HIGH);
 if(j==18){ PORTL = bit(nPin);}if(j==19){PORTL = ~bit(nPin);}//digitalWrite(rMCU, HIGH);
  unsigned int cycle = TCNT1;
}