void setup() {

  pinMode(5, OUTPUT);
  pinMode(12, OUTPUT);

}
/*
    Relevant Functions:
      To turn PIN 2 ON: 
      digitalWrite(2, HIGH);

      To turn PIN 2 OFF:
      digitalWrite(2, LOW);

      DELAYS: (in ms)
      delay(100);   // in ms

    Example: 
      set LED ON PIN 12 ON AND OFF FOR 2 SECONDS INTERVAL and repeat
      
      void loop()
      {
        digitalWrite(12, HIGH);
        delay(2000);
        digitalWrite(12, LOW);
        delay(2000);

      }
  
    Assignment:: 
    TWO SEQUENTIAL LED Blinks :
      --> Turn ON PIN 12 ( LED 12)
      --> After 2 seconds, TURN ON PIN 5 (keep PIN 12 ON)
      --> After 1 second,  turn both PINS OFF
      --> Wait for 2 seconds 
      --> Repeat
      --> Try to simulate it to see if you get the LEDS blinking accordingly

*/
void loop(){
  // Start your code here





  // end
}