#include "DHT.h"
#include <LiquidCrystal_I2C.h>
#define DHTPIN 2     
#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321
LiquidCrystal_I2C lcd (0x27, 16,2);
DHT dht(DHTPIN, DHTTYPE);

void setup() {
  Serial.begin(115200);
  Serial.println(F("DHT22 example!"));
  lcd.init();
  lcd.backlight();
  dht.begin();
  lcd.print("Raihan XI TEI 3");
  delay(1000);
}

void loop() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();
  int chk = temperature; //Reading data from the module
    float t= temperature*(9/5) + 32;
  // Check if any reads failed and exit early (to try again).
  if (isnan(temperature) || isnan(humidity)) {
    Serial.println(F("Failed to read from DHT sensor!"));
    return;
  }

  Serial.print(F("Humidity: "));
  Serial.print(humidity);
  Serial.print(F("%  Temperature: "));
  Serial.print(temperature);
  lcd.setCursor(0,0);
  lcd.print("Temp: ");
  Serial.print(F("°C "));
  Serial.print(F("Farenheit :"));
  Serial.println(t);
  lcd.setCursor(6,0);
  lcd.print(temperature);
  lcd.setCursor(12,0);
  lcd.print("C");
  lcd.setCursor(0,1);
  lcd.print("Hum :");
  lcd.setCursor(6,1);
  lcd.print(humidity);
  lcd.setCursor(12,1);
  lcd.print("%");

  // Wait a few seconds between measurements.
  delay(2000);
}