#include <LiquidCrystal.h>

// initialize the library by associating any needed LCD interface pin
// with the arduino pin number it is connected to
char message[]={"12111713"};
char mes[]={"Girija Shankar"};
char mes2[]={"How are you"};
const int rs = 12, en = 14, d4 = 26, d5 =25, d6 = 33, d7 = 32;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

void setup() {
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("hello");
}

void loop() {
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 0);
  for(int i=0;i<=8;i++)
  {
    lcd.print(message[i]);
    delay(100);
    if(i>16)
    {
      lcd.autoscroll();
    }

  }
  lcd.setCursor(0, 1);
  for(int i=0;i<=13;i++)
  {
    lcd.print(mes[i]);
    delay(100);
    if(i>16)
    {
      lcd.autoscroll();
    }

  }
  lcd.setCursor(0, 1);
  for(int i=0;i<=11;i++)
  {
    lcd.print(mes2[i]);
    delay(100);
    if(i>16)
    {
      lcd.autoscroll();
    }

  }

  // print the number of seconds since reset:
 // lcd.print("LPU");
}