/*
  Blink

  Turns an LED on for one second, then off for one second, repeatedly.

  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
  the correct LED pin independent of which board is used.
  If you want to know what pin the on-board LED is connected to on your Arduino
  model, check the Technical Specs of your board at:
  https://www.arduino.cc/en/Main/Products

  modified 8 May 2014
  by Scott Fitzgerald
  modified 2 Sep 2016
  by Arturo Guadalupi
  modified 8 Sep 2016
  by Colby Newman

  This example code is in the public domain.

  http://www.arduino.cc/en/Tutorial/Blink
*/

// the setup function runs once when you press reset or power the board

//int PWM_Pin = 9; /* give PWM_Pin name to timer2 pin */
#include <TimerOne.h>;
#include <TimerThree.h>;

void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
  Timer3.initialize(17.999);
Timer3.pwm(2,512);
Timer1.initialize(28);
Timer1.pwm(11,512);
  //pinMode(PWM_Pin,OUTPUT);  /*declare D3 pin as an output pin */ 
  //TCCR2B = TCCR2B & B11111000 | B00000111;
}
/*static void IR_PWM_INIT(void)  
  {
  // Freq.=38Khz. Pulse is 26uSec. ATMega 16 ClockCyclesPerMicrosec. Period = (16 * 26)/2
  #define top  207; 
  #define prescaler 1; // Clock niet laten delen door de prescaler. Dit is nit nodig voor deze frequentie
  
  // PWM output OC2B (PMW-9 defined as output)
  
  TCCR2A=0;
  TCCR2B=0;
  TCNT2=0;             // Set counter to zero, fresh start.
  ASSR&=~_BV(AS2);     // clock is input for prescaler input:
  OCR2B=top;           // Set Output Compare register. 
  
  TCCR2A=_BV(WGM21);   // CTC-mode: 010 = clear timer on compare match. 
  TCCR2B=prescaler;    // 001 = No prescaling
  }
*/



// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);                       // wait for a second
  digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  delay(100);                       // wait for a second
  //analogWrite(PWM_Pin,64);  /* Produce 25% duty cycle PWM on D3 */
  //TCCR2B = TCCR2B & B11111000 | B00000111;

  
}