/**
   ESP32 + DHT22 Example for Wokwi
   
   https://wokwi.com/arduino/projects/322410731508073042
*/

#include "DHTesp.h"
#include <WiFi.h>
#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C LCD = LiquidCrystal_I2C(0x27, 16, 2);

#define NTP_SERVER     "pool.ntp.org"
#define UTC_OFFSET     0
#define UTC_OFFSET_DST 0
#define uS_TO_S_FACTOR 1000000  /* Conversion factor for micro seconds to seconds */
#define TIME_TO_SLEEP  5        /* Time ESP32 will go to sleep (in seconds) */

RTC_DATA_ATTR int bootCount = 0;

const int DHT_PIN = 15;

DHTesp dhtSensor;

void print_wakeup_reason(){
  esp_sleep_wakeup_cause_t wakeup_reason;

  wakeup_reason = esp_sleep_get_wakeup_cause();

  switch(wakeup_reason)
  {
    case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
    case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
    case ESP_SLEEP_WAKEUP_TIMER : Serial.println("Wakeup caused by timer"); break;
    case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("Wakeup caused by touchpad"); break;
    case ESP_SLEEP_WAKEUP_ULP : Serial.println("Wakeup caused by ULP program"); break;
    default : Serial.printf("Wakeup was not caused by deep sleep: %d\n",wakeup_reason); break;
  }
}


void spinner() {
  static int8_t counter = 0;
  const char* glyphs = "\xa1\xa5\xdb";
  LCD.setCursor(15, 1);
  LCD.print(glyphs[counter++]);
  if (counter == strlen(glyphs)) {
    counter = 0;
  }
}

void printLocalTime() {
  struct tm timeinfo;
  if (!getLocalTime(&timeinfo)) {
    LCD.setCursor(0, 1);
    LCD.println("Connection Err");
    return;
  }

  LCD.setCursor(0, 1);
  LCD.println(&timeinfo, "%H:%M:%S");

  //LCD.setCursor(0, 1);
  //LCD.println(&timeinfo, "%d/%m/%Y   %Z");
}

void setup() {
  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);

  LCD.init();
  LCD.backlight();
  LCD.setCursor(0, 0);
  LCD.print("Connecting to ");
  LCD.setCursor(0, 1);
  LCD.print("WiFi ");
  
  WiFi.begin("Wokwi-GUEST", "", 6);
  while (WiFi.status() != WL_CONNECTED) {
    delay(100);
    spinner();
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  LCD.clear();
  LCD.setCursor(0, 0);
  LCD.println("Online");
  LCD.setCursor(0, 1);
  LCD.println("Updating time...");
  configTime(UTC_OFFSET, UTC_OFFSET_DST, NTP_SERVER);
}

void loop() {
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  LCD.setCursor(0, 0);
  LCD.print(String(data.temperature, 2) + "°C " + String(data.humidity, 1) + "%");
  printLocalTime();
  delay(1000);

}