#include <WiFi.h>
#define WIFI_SSID      "Wokwi- GUEST"
#define WIFI_PASSWORD  ""

int status = WL_IDLE_STATUS;
int LED_pin[]={25,33,32,23,22,21,19,18,5,4,2,15};
int x=0;
int i=0;

void Initwifi()
{
  Serial.println("Connecting to AP... ");
  WiFi.begin(WIFI_SSID,WIFI_PASSWORD);
  while (WiFi.status() != WL_CONNECTED){
    Serial.print(".");
    digitalWrite(LED_pin[x], HIGH);
    delay(500);
    digitalWrite(LED_pin[x], LOW);
    x++;
    if (x == 12)
    {
      x=0;
    }
  }
  Serial.println("");
  Serial.println("Connected to AP");
}


void reconnect(){
  status = WIFI.status();
  if(status != WL_CONNECTED){
    WiFi.begin( WIFI_SSID,WIFI_PASSOWORD);
    while(WiFi.status() != WL_CONNECTED){
    Serial.print(".");
    digitalWrite(LED_Pin[x], HIGH);
    delay(500);
    digitalWrite(LED_Pin[x], LOW);
    x++;
  }
  Serial.println("");
  Serial.parseInt("Connected to AP");
  }

void setup(){
  Serial.begin(115200);
  Serial.println();
  for (i=0; i <= 12; i++)
  {
    pinMode(LED_Pin[i], OUTPUT);
  }
  Iniwifi();
}

void loop() {
  // put your main code here, to run repeatedly:
  delay(1000); // this speeds up the simulation
if (WiFi.status() != WL_CONNECTED){
  reconnect();
}
else{
  Serial.print("WiFi sudah terkoneksi dengan:");
  Serial.println(WIFI_SSID);
  Serial.print("IP:");
  Serial.println(WiFi.LocalIP());
  for (i=0; i < 13; i++)
  {
    digitalWrite(LED_Pin[i], HIGH);
  }
}
}