#include <LiquidCrystal.h>

LiquidCrystal lcd(7, 6, 5, 4, 3, 2);

// Wokwi ONLY!!!
const float BETA = 3950; // should match the Beta Coefficient of the thermistor

void setup() {
  ADCSRA |= ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0)); // Set the ADC clock to 16 MHz / 128 = 125 kHz
  ADMUX  |= (1 << REFS0);                                 // Set the ref. voltage to Vcc (5V)
  ADCSRA |= (1 << ADEN);                                  // Activate the ADC
  ADCSRA |= (1 << ADSC);
  lcd.begin(16,2);
}

void loop() {
  int val = read_adc(0); // Read the value
  lcd.setCursor(0,0);
  lcd.print("Raw:  ");
  lcd.print(val);
  
  // Wokwi ONLY!!!
  // lcd.setCursor(0,1);
  // lcd.print("Calc: ");
  // float calc_val = 1 / (log(1 / (1023. / val - 1)) / BETA + 1.0 / 298.15) - 273.15;
  // lcd.print(calc_val);
}

uint16_t read_adc(uint8_t channel) {
  ADMUX  &= 0xE0;               // Delete MUX0-4 bits
  ADMUX  |= channel & 0x07;     // Sets in MUX0-2 the value of the new channel to be read
  ADCSRB =  channel & (1 << 3); // Set MUX5 value
  ADCSRA |= (1 << ADSC);        // Start conversion
  while (ADCSRA & (1 << ADSC)); // Wait for the conversion to finish
  return ADCW;
}