// LCD1602 to Arduino Uno connection example
#include "rfClassifier.h" 
#include <LiquidCrystal.h>
#include "DHT.h"
float instance[2];
#define DHTPIN 2     
#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321

DHT dht(DHTPIN, DHTTYPE);
int predict;
LiquidCrystal lcd(12, 11, 10, 9, 8, 7);

void setup() {

  Serial.begin(115200);
  Serial.println(F("DHT22 example!"));

  dht.begin();


  lcd.begin(16, 2);
  // you can now interact with the LCD, e.g.:
  lcd.print("Hello World!");
}

void loop() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();


  // Check if any reads failed and exit early (to try again).
  if (isnan(temperature) || isnan(humidity)) {
    Serial.println(F("Failed to read from DHT sensor!"));
    return;
  }

  Serial.print(F("Humidity: "));
  Serial.print(humidity);
  Serial.print(F("%  Temperature: "));
  Serial.print(temperature);
  Serial.println(F("°C "));
  instance[0]=temperature;
  instance[1]=temperature;
  predict=rfClassifier.predict(instance);
  if(predict==0)
  {
    lcd.setCursor(0, 0);
    lcd.print("Extreme");
  }
  else {
    lcd.setCursor(0, 0);
    lcd.print("Normal");
  }



  // Wait a few seconds between measurements.
  delay(2000);
  lcd.clear();


}