//https://www.youtube.com/watch?v=GoJ6v5mEX0Q



//Dados abaixo são oriundos do BLYNK após criação do dashboard
#define BLYNK_TEMPLATE_ID           "TMPL2IPFx43O"
#define BLYNK_DEVICE_NAME           "Quickstart Device"
#define BLYNK_AUTH_TOKEN            "N9uPaSiaVrSJkRnG-A4NY1KSr236cc3A"

#define BLYNK_PRINT Serial

#include <WiFi.h>
#include <BlynkSimpleEsp32.h>
#include "DHTesp.h" //Library untuk DHT

char auth[] = BLYNK_AUTH_TOKEN ; //Auth Token

char ssid[] = "Wokwi-GUEST"; //nama hotspot yang digunakan
char pass[] = ""; //password hotspot yang digunakan

const int DHT_PIN = 15;

int value0, value1, value2, value3, value6;

byte LED_R = 26;
byte LED_Y = 27;
byte LED_G = 14;
byte LED_B = 12;

DHTesp dht;

BlynkTimer timer;

//function untuk pengiriman sensor
void sendSensor()
{
 TempAndHumidity  data = dht.getTempAndHumidity();

//menampilkan temperature pada Serial monitor
Serial.print("% Temperature: ");
Serial.print(data.temperature);
Serial.println("C ");
Serial.print("% Kelembaban: ");
Serial.print(data.humidity);
Serial.println("% ");

Blynk.virtualWrite(V4, data.temperature); //mengirimkan data temperatur ke Virtual pin VO di Blynk Cloud
Blynk.virtualWrite(V5, data.humidity); //mengirimkan data kelemaban ke Virtual pin V1 di Blynk Cloud
}

BLYNK_WRITE(V0)
{
  value0 = param.asInt();
  digitalWrite(LED_R, value0);
  Blynk.virtualWrite(V7, value0);
  cekAllLed();
}

BLYNK_WRITE(V1)
{
  value1 = param.asInt();
  digitalWrite(LED_Y, value1);
  Blynk.virtualWrite(V8, value1);
  cekAllLed();
}

BLYNK_WRITE(V2)
{
  value2 = param.asInt();
  digitalWrite(LED_G, value2);
  Blynk.virtualWrite(V9, value2);
  cekAllLed();
}

BLYNK_WRITE(V3)
{
  value3 = param.asInt();
  digitalWrite(LED_B, value3);
  Blynk.virtualWrite(V10, value3);
  cekAllLed();
}

BLYNK_WRITE(V6)
{
  value6 = param.asInt();

  digitalWrite(LED_R, value6);
  Blynk.virtualWrite(V7, value6);
  Blynk.virtualWrite(V0, value6);
  
  digitalWrite(LED_Y, value6);
  Blynk.virtualWrite(V8, value6);
  Blynk.virtualWrite(V1, value6);

  digitalWrite(LED_G, value6);
  Blynk.virtualWrite(V9, value6);
  Blynk.virtualWrite(V2, value6);

  digitalWrite(LED_B, value6);
  Blynk.virtualWrite(V10, value6);
  Blynk.virtualWrite(V3, value6);
}

void cekAllLed(){
  if(value0 == 1 && value1 == 1 && value2 == 1 && value3 == 1){
    Blynk.virtualWrite(V6, 1);
  }
  else{
    Blynk.virtualWrite(V6, 0);
  }
  // if(value0 == 0 && value1 == 0 && value2 == 0 && value3 == 0){
  //   Blynk.virtualWrite(V6, 0);
  // }
}

void setup()
{
// Debug console
Serial.begin(115200); //serial monitor menggunakan bautrate 9600
dht.setup(DHT_PIN, DHTesp::DHT22);
pinMode(LED_R, OUTPUT);
pinMode(LED_Y, OUTPUT);
pinMode(LED_G, OUTPUT);
pinMode(LED_B, OUTPUT);
Blynk.begin(auth, ssid, pass); //memulai Blynk
timer.setInterval(1000, sendSensor); //Mengaktifkan timer untuk pengiriman data 1000ms
}

void loop()
{

Blynk.run(); //menjalankan blynk
timer.run(); //menjalankan timer
}