#include <IRremote.h>
#include <Servo.h>
#include <FastLED.h>

CRGB leds[0];
int pin_receiver = 2;
int btn_value = 0;
int bright  = 20;

Servo myservo1;
IRrecv receiver(pin_receiver);

void setup() {
  receiver.enableIRIn();
  myservo1.attach(10);
  Serial.begin(9600);

  FastLED.addLeds<NEOPIXEL, 3>(leds, 1);

}

void loop() {
  if (receiver.decode()) {
    translateIR();
    receiver.resume();
  }
}
void translateIR()
{
  btn_value = receiver.decodedIRData.command;
  Serial.println(btn_value);
  if (btn_value == 226) {
    Serial.println("-----------------------");
    Serial.println("         MENU");
    Serial.println("-----------------------");
    Serial.println("1. Forward - Driver Door Opens \n2. Backward - Driver Door Closes \n3. 1 - Lights ON in RED \n4. 2- Lights ON in Green \n5. 3 - Lights ON in Blue \n6. 4 - Blinking LED \n7. Play - Control LED Glow \n8. 9 - Stop ALL ");
  }
  
  if (btn_value == 224) {
    myservo1.write(0);
    Serial.println("Door Closed");
  }
  if (btn_value == 144) {
    myservo1.write(180);
    Serial.println("Door Open");
  }
  if (btn_value == 48) {
    leds[1] = CRGB::Red ;
    FastLED.show();

  }
  if (btn_value == 24) {
    leds[1] = CRGB::Green ;
    FastLED.show();

  }
  if (btn_value == 122) {
    leds[1] = CRGB::Blue ;
    FastLED.show();

  }
  if (btn_value == 16) {
    //  leds[1] = CRGB::Blue ;
    //  FastLED.show();
    for (int i = 0; i <= 20; i++) {
      leds[1] = CRGB(0, 255, 221);
      FastLED.show();
      delay(50);
      leds[1] = CRGB(233, 255, 34);
      FastLED.show();
      delay(50);
      leds[1] = CRGB(255, 0, 191);
      FastLED.show();
      delay(50);
    }
  }
  if (btn_value == 168) {
    bright =  bright + 40;
    FastLED.setBrightness(bright);
    FastLED.show();

  }
  if (btn_value == 82) {
    Serial.println("-----------------------");
    Serial.println("      POWER OFF");
    Serial.println("-----------------------");
    myservo1.write(90);
    FastLED.clear();
    FastLED.show();

  }

}