#include <Servo.h>
#define PIR_MOTION_SENSOR_PIN 3
#define BUZZER_PIN 5
#define LED_PIN 2
#define SERVO_PIN 10

Servo servo;

void setup() {
  pinMode(PIR_MOTION_SENSOR_PIN, INPUT);
  pinMode(BUZZER_PIN, OUTPUT);
  pinMode(LED_PIN, OUTPUT);
  servo.attach(SERVO_PIN);
}

void loop() {
  int pirState = digitalRead(PIR_MOTION_SENSOR_PIN);
  if (pirState == HIGH) {
    digitalWrite(BUZZER_PIN, HIGH);
    digitalWrite(LED_PIN, HIGH);
    servo.write(180);
    delay(86400000);//24ชม.
    digitalWrite(BUZZER_PIN, LOW);
    digitalWrite(LED_PIN, LOW);
  } else {
    servo.write(0);
    delay(100);
  }
}