/*
  Simple "Hello World" for ILI9341 LCD

  https://wokwi.com/arduino/projects/308024602434470466
*/

#include "SPI.h"
#include "Adafruit_GFX.h"
#include "Adafruit_ILI9341.h"

//button
#define button_pin 7

//display stuff
#define TFT_DC 9
#define TFT_CS 10
Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC);

// Color definitions
#define BLACK    0x0000
#define BLUE     0x001F
#define RED      0xF800
#define GREEN    0x07E0
#define CYAN     0x07FF
#define MAGENTA  0xF81F
#define YELLOW   0xFFE0 
#define WHITE    0xFFFF

//rotory encoder inputs
#define CLK 2
#define DT 3
#define SW 4

int counter = 0;
int currentStateCLK;
int lastStateCLK;
String currentDir ="";
unsigned long lastButtonPress = 0;



void setup() {
 int test = 1;
 
  tft.begin();

  tft.setCursor(26, 120);
  tft.setTextColor(0xFA00);
  tft.setTextSize(3);
  tft.println(test);

  tft.setCursor(20, 160);
  tft.setTextColor(ILI9341_GREEN);
  tft.setTextSize(2);
  tft.println("I can has colors?");
  tft.drawPixel(30, 50, 0xF800);
  tft.drawPixel(30, 51, 0xF800);

delay(2000);
  tft.fillScreen(0xFFFF);
                

// use button for input 
pinMode(button_pin, INPUT);

	// Set encoder pins as inputs
	pinMode(CLK,INPUT);
	pinMode(DT,INPUT);
	pinMode(SW, INPUT_PULLUP);

	// Setup Serial Monitor
	Serial.begin(9600);
  Serial.println("test");

	// Read the initial state of CLK
	lastStateCLK = digitalRead(CLK);
}


void loop() {
	
	// Read the current state of CLK
	currentStateCLK = digitalRead(CLK);

	// If last and current state of CLK are different, then pulse occurred
	// React to only 1 state change to avoid double count
	if (currentStateCLK != lastStateCLK  && currentStateCLK == 1){

		// If the DT state is different than the CLK state then
		// the encoder is rotating CCW so decrement
		if (digitalRead(DT) != currentStateCLK) {
			counter ++;
			currentDir ="CW";
		} else {
			// Encoder is rotating CW so increment
			counter --;
			currentDir ="CCW";
		}

		Serial.print("Direction: ");
		Serial.print(currentDir);
		Serial.print(" | Counter: ");
		Serial.println(counter);
	}

	// Remember last CLK state
	lastStateCLK = currentStateCLK;

	// Read the button state
	int btnState = digitalRead(SW);

	//If we detect LOW signal, button is pressed
	if (btnState == LOW) {
		//if 50ms have passed since last LOW pulse, it means that the
		//button has been pressed, released and pressed again
		if (millis() - lastButtonPress > 50) {
			Serial.println("Button pressed!");
		}

		// Remember last button press event
		lastButtonPress = millis();
	}

	// Put in a slight delay to help debounce the reading
	delay(1);
}
/*
void loop() {

if(digitalRead(button_pin), HIGH) {
  tft.fillScreen(0x0000);
}
}
*/