#define L1 5 //MERAH
#define L2 4 //Biru
#define L3 2 // Hijau
int button1 = 18;
int onvalue = 0;
const int flamepin = 15;
int Flame = LOW;

//========================================
void setup (){
  Serial.begin(9600);
  pinMode(L1,OUTPUT);
  pinMode(L2,OUTPUT);
  pinMode(L3, OUTPUT);
}
//=========================================
void SensorLDR(){
  Flame = analogRead(flamepin);
  Serial.println ("lux: ");
  Serial.println(Flame);
  if (Flame >1){
    digitalWrite(L1, HIGH);
    delay(14000);
    digitalWrite(L1, HIGH);
    digitalWrite(L2, HIGH);
    delay(16000);
    digitalWrite(L1, HIGH);
    digitalWrite(L2, HIGH);
    digitalWrite(L3, HIGH);
    delay(13000);
    digitalWrite(L2, LOW);
    digitalWrite(L3, LOW);
    digitalWrite(L1, LOW);
  }
  else{
    digitalWrite(L1, LOW);
    digitalWrite(L2, LOW);
    digitalWrite(L3, LOW);
  }
  onvalue = digitalRead(button1);
  if(onvalue == HIGH){
    digitalWrite(L1, HIGH);
    digitalWrite(L2, HIGH);
    delay(16000);
    digitalWrite(L1, LOW);
    digitalWrite(L2, LOW);
    delay(100);
    digitalWrite(L3, HIGH);
    delay(18000);
    digitalWrite(L1, LOW);
    digitalWrite(L2, LOW);
    digitalWrite(L3, LOW);
  }
}
void loop(){
  SensorLDR();
}