int redPin=11;  //establece LED rojo al pin 11
int greenPin=10; //establece LED verde al pin 10
int bluePin=7; //establece LED azul al pin 6
int brightness=255; //Variable apra manejar el brillo=255

int botonPin = 9;
int botonNuevo;
int botonViejo = 1;
int estadoLED=0;
int dt=100;


void setup() {
  // put your setup code here, to run once:
 
 Serial.begin(9600); //Turn on Serial port
 pinMode(redPin, OUTPUT); //Set redPin to be an output
 pinMode(greenPin, OUTPUT); //Set greenPin to be an output
 pinMode(bluePin, OUTPUT); //set bluePin to be an output
 
 pinMode(botonPin, INPUT);
}
 
void loop() {
  // put your main code here, to run repeatedly: 
 /*
  analogWrite(redPin, 0); //apaga pin rojo(redPin, 0)
  analogWrite(greenPin, 0); //apaga pin verde(redgreenPin, 0)
  analogWrite(bluePin, 255); //escribe el valor de la variable (brightness) en el pin azul
  */
 botonNuevo;

  setColor(255, 0, 0); // Red Color
  delay(1000);
  setColor(0, 255, 0); // Green Color
  delay(1000);
  setColor(0, 0, 255); // Blue Color
  delay(1000);
  setColor(255, 255, 255); // White Color
  delay(1000);
  setColor(170, 0, 255); // Purple Color
  delay(1000);
  setColor(255, 255, 0); // yellow Color
  delay(1000);

}
 void setColor(int redValue, int greenValue, int blueValue) {
  analogWrite(redPin, redValue);
  analogWrite(greenPin, greenValue);
  analogWrite(bluePin, blueValue);

}
/*
VIOLETA
  analogWrite(redPin, 100); //turn off red pin
  analogWrite(greenPin, 100); //turn off green pin
  analogWrite(bluePin, 50); //write 100 (brightness) to blue pin
CIAN
  analogWrite(redPin, 0); //turn off red pin
  analogWrite(greenPin, 90); //turn off green pin
  analogWrite(bluePin, 15); //write 100 (brightness) to blue pin
BLANCO
  analogWrite(redPin, 100); //turn off red pin
  analogWrite(greenPin, 100); //turn off green pin
  analogWrite(bluePin, 100); //write 100 (brightness) to blue pin
ORANGE
  analogWrite(redPin, 100); //turn off red pin
  analogWrite(greenPin, 20); //turn off green pin
  analogWrite(bluePin, 100); //write 100 (brightness) to blue pin
YELLOW ????
  analogWrite(redPin, ); //turn off red pin
  analogWrite(greenPin, ); //turn off green pin
  analogWrite(bluePin, ); //write 100 (brightness) to blue pin

*/