#include <WiFi.h>
#include <ArduinoJson.h>
#include "PubSubClient.h"

const char * MQTTServer = "broker.emqx.io";
const char * MQTT_Topic = "phat/baitap7";
const char * MQTT_ID = "";
int Port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);
const int denleddo = 2;
const int denledvang = 4;
const int denledxanh = 5;

char a;

void WIFIConnect() {
  Serial.println("Connecting to SSID: Wokwi-GUEST");
  WiFi.begin("Wokwi-GUEST", "");
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("WiFi connected");
  Serial.print(", IP address: ");
  Serial.println(WiFi.localIP());
}

void MQTT_Reconnect() {
  while (!client.connected()) {
    if (client.connect(MQTT_ID)) {
      Serial.print("MQTT Topic: ");
      Serial.print(MQTT_Topic);
      Serial.print(" connected");
      client.subscribe(MQTT_Topic);
      Serial.println("");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.println(topic);
  Serial.print("Message: ");
  String stMessage;
  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    stMessage += (char)message[i];
  }
  StaticJsonDocument<256> doc;
  deserializeJson(doc,stMessage);
  int denxanh = doc["denxanh"];
  int denvang = doc["denvang"];
  int dendo = doc["dendo"];
  
  digitalWrite(denledxanh, HIGH);
  delay(denxanh);
  digitalWrite(denledxanh, LOW);

  digitalWrite(denledvang, HIGH);
  delay(denvang);
  digitalWrite(denledvang, LOW);

  digitalWrite(denleddo, HIGH);
  delay(dendo);
  digitalWrite(denleddo, LOW);
}

void setup() {
  Serial.begin(115200);
  pinMode(denledxanh, OUTPUT);
  pinMode(denledvang, OUTPUT);
  pinMode(denleddo, OUTPUT);
  WIFIConnect();
  client.setServer(MQTTServer, Port);
  client.setCallback(callback);
  
}

void loop() {
  delay(10);
  if (!client.connected()) {
    MQTT_Reconnect();
  }
  client.loop();
 
  
}