// const int analogInPin = A0;
// const int analogOutPin = 5;

// int sensorValue = 0;
// int outputValue = 0;

// void setup() {
//   // put your setup code here, to run once:
//   Serial.begin(9600);
//   pinMode(analogOutPin, OUTPUT);
// }

// void loop() {
//   // put your main code here, to run repeatedly:
//   sensorValue = analogRead(analogInPin);
//   outputValue = map(sensorValue, 0, 1023, 255, 0);

//   analogWrite(analogOutPin, long(float(outputValue-512)/(1023-512)*255));

//   Serial.print("Sensor = ");
//   Serial.print(sensorValue);
//   Serial.print("\t output = ");
//   Serial.print(outputValue);
//   Serial.print("\n");
//   delay(2);
// }


const int pinPot1 = A0;
const int pinPot2 = A1;
const int pinLED = 3;

int valPot1;
int valPot2;

void setup() {
  pinMode(pinPot1, INPUT);
  pinMode(pinPot1, INPUT);
  pinMode(pinLED, OUTPUT);
}

void loop() {
  //   valPot1 = analogRead(pinPot1);
  // valPot2 = analogRead(pinPot2);

  // valPot1 = map(valPot1, 0, 1023, 0, 10);
  // valPot2 = map(valPot2, 0, 1023, 1, 500);

  // digitalWrite(pinLED, HIGH);
  // delay(valPot2);

  // digitalWrite(pinLED, LOW);
  // delay(valPot2);


  valPot1 = analogRead(pinPot1);
  valPot2 = analogRead(pinPot2);

  valPot1 = map(valPot1, 0, 1023, 0, 10);
  valPot2 = map(valPot2, 0, 1023, 1, 500);

  digitalWrite(pinLED, HIGH);
  delay(valPot1 * valPot2);

  digitalWrite(pinLED, LOW);
  delay((10-valPot1) * valPot2);

  //   valPot1 = analogRead(pinPot1);
  // valPot2 = analogRead(pinPot2);

  // valPot1 = map(valPot1, 0, 1023, 0, 10);
  // valPot2 = map(valPot2, 0, 1023, 1, 500);

  // analogWrite(pinLED, valPot1 * valPot2);



  // valPot1 = analogRead(pinPot1);
  // valPot2 = analogRead(pinPot2);

  // valPot1 = map(valPot1, 0, 1023, 0, 10);
  // valPot2 = map(valPot2, 0, 1023, 1, 500);

  // digitalWrite(pinLED, HIGH);
  // delay(valPot1 * valPot2);

  // digitalWrite(pinLED, LOW);
  // delay(valPot1 * valPot2);
}