// from learnSequencePuzzle.ino

// https://forum.arduino.cc/t/toggle-switch-puzzle-but-sequential/1091460
// https://wokwi.com/projects/357012577248058369

# define SEVEN   5    // puzzle size
# include <SPI.h>

# include <Adafruit_NeoPixel.h>

# define LED_PIN    A2
# define LED_COUNT  SEVEN
# define LED_PIN2    A5
# define LED_COUNT2  45

Adafruit_NeoPixel disaply(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);
Adafruit_NeoPixel strip(LED_COUNT2, LED_PIN2, NEO_GRB + NEO_KHZ800);

unsigned char combo[SEVEN];
unsigned char lastSwitch[SEVEN];
enum Runstate {START, RUNNING, FAULT, SUCCESS} runState;

# define redLED   A1    // bad
# define greenLED A0    // good

# define NOKEY  99      // impossible key value as a flag

const byte inputPin[SEVEN] = {9, 10, 11, 12, 13};
// This pin will be driven LOW to release a lock when puzzle is solved
const byte lockPin = A3;
const byte lockPin2 = A4;

void setup() {
  Serial.begin(115200); Serial.println("HE LL O!\n");

  for (unsigned char ii = 0; ii < SEVEN; ii++) {
    pinMode(inputPin[ii], INPUT_PULLUP);

    lastSwitch[ii] = digitalRead(inputPin[ii]);
  }

  pinMode(greenLED, OUTPUT);
  pinMode(redLED, OUTPUT);
      // Set the lock pin as output and secure the lock
  pinMode(lockPin, OUTPUT);
  digitalWrite(lockPin, HIGH);
  pinMode(lockPin2, OUTPUT);
  digitalWrite(lockPin2, LOW);

  disaply.begin();
  disaply.show();
  strip.clear();
  strip.begin();


  reset();
  runState = RUNNING;
  newCombo0();
}

unsigned char nIn = 0;    // number of correct steps taken sofa

void loop() {
  unsigned char pKey = scanKeys();

    random();

  switch (runState) {
    case RUNNING:
      if (pKey == NOKEY)
        return;

      // presst a key, all key are valid so

      if (pKey == combo[nIn]) {
        nIn++;
        displayDisplay();
        goodFlash();
        if (nIn == SEVEN) {
          Serial.println("You are in!");
          runState = SUCCESS;
          // Release the lock
          digitalWrite(lockPin, LOW);
          theaterChase(strip.Color(255, 255, 255), 100, 3, 5); // White, full brightness          
        }
      }
      else {
    Serial.print("             BZZZT!");
        runState = FAULT;
        // Sound the Buzzer    
        digitalWrite(lockPin2, HIGH);  
        delay (500);
        digitalWrite(lockPin2, LOW);                  
      }
      break;
    case FAULT:
      badFlash();
      if (keysum() == 0) {
        reset();
        displayDisplay();
        runState = START;
      }
      break;
    case SUCCESS:
      reward();
      if (pKey != NOKEY) {
        newCombo0();
        reset();
        displayDisplay();
        runState = FAULT;
      }
      break;
    case START:
      runState = RUNNING;
      break;
    default:
      runState = START;
      break;
  }

}

void goodFlash()
{
  digitalWrite(A1, HIGH);
  delay(100);
  digitalWrite(A1, LOW);

  displayDisplay();
}

void badFlash()
{
  static uint32_t last = 0;
  const int interval = 50;
  if (millis() - last >= interval) {
    last = millis();
    digitalWrite(A0, !digitalRead(A0));
    displayDisplay();
    digitalWrite(A0, LOW);
  }
}

void reward()
{
  static uint32_t last = 0;
  const int interval = 600;
  static bool off = true;
  if (millis() - last < interval) return;
  last = millis();
  if (off) { // turn on
    nIn = SEVEN; displayDisplay();
    digitalWrite(A1, HIGH);
  } else {
    digitalWrite(A1, LOW);
    nIn = 0; displayDisplay();
    off = true;
  }
}

void reset()
{
  nIn = 0;
  digitalWrite(A1, LOW);
}

void displayDisplay()
{
  for (unsigned char tt = 0; tt < SEVEN; tt++) {
    //    disaply.setPixelColor(tt, tt >= nIn ? 0x001010 : 0x00ff00);
    if (runState != FAULT) {
      disaply.setPixelColor(combo[tt], tt >= nIn ? 0x000000 : 0x00ff00);
      strip.fill(tt >= nIn ? 0x000000 : 0x00ff00, combo[tt] *9, 9);
    } else {
      disaply.setPixelColor(tt, lastSwitch[tt] ? 0xff0000 : 0x000000);
      strip.fill(lastSwitch[tt] ? 0xff0000 : 0x000000, tt *9, 9);
    }
  }

  disaply.show();
  strip.show();
}

// scanKeysO looks for a button going pressed
// scanKeys just looks for a change of state

unsigned char scanKeys()
{
  // printf("scan keys ");

  unsigned char newKeyQ = NOKEY;

  static unsigned long lastTime;

  unsigned char currentKey = NOKEY;
  unsigned long now = millis();

  if (now - lastTime < 40)      // too soon to look at anything
    return currentKey;
  lastTime = now;
  for (unsigned char ii = 0; ii < SEVEN; ii++) {
    unsigned char aSwitch = digitalRead(inputPin[ii]);
    if (aSwitch != lastSwitch[ii]) {
      currentKey = ii;
      lastSwitch[ii] = aSwitch;
    }
  }

  return currentKey;
}

int keysum() {
  int retval = 0;
  for (unsigned char ii = 0 ; ii < SEVEN; ii++) {
    retval += lastSwitch[ii];
  }
  return retval;
}

unsigned char scanKeys0()
{
  // printf("scan keys ");
  unsigned char newKeyQ = NOKEY;

  static unsigned long lastTime;
  static unsigned char wasPressed = 0;

  char isPressed = 0;
  unsigned char currentKey = NOKEY;
  unsigned long now = millis();

  if (now - lastTime < 40)
    return currentKey;

  for (unsigned char ii = 0; ii < SEVEN; ii++) {
    if (!digitalRead(inputPin[ii])) {
      newKeyQ = ii;
      isPressed = 1;
    }
  }

  if (isPressed != wasPressed) {
    lastTime = now;
    if (isPressed)
      currentKey = newKeyQ;
    wasPressed = isPressed;
  }

  return currentKey;
}



void newCombo0()
{
  for (unsigned char ii = 0; ii < SEVEN; ii++)
    combo[ii] = ii;

  for (int ii = 0; ii < 5000; ii++) {
    unsigned char tt = random(SEVEN);
    unsigned char ss = random(SEVEN);
    unsigned char temp;

    temp = combo[tt];
    combo[tt] = combo[ss];
    combo[ss] = temp;
  }

  // return;   // if you do not want to print the combination!

  for (unsigned char ii = 0; ii < SEVEN; ii++) {
    Serial.print(combo[ii]);
    Serial.print("  ");
  }

  Serial.println();
}

/*
* Fills a strip with a specific color, starting at 0 and continuing
* until the entire strip is filled. Takes two arguments:
* 
*     1. the color to use in the fill
*     2. the amount of time to wait after writing each LED
*/
void colorWipe(uint32_t color, unsigned long wait) {
	for (unsigned int i = 0; i < strip.numPixels(); i++) {
		strip.setPixelColor(i, color);
		strip.show();
		delay(wait);
	}
}

/*
* Runs a marquee style "chase" sequence. Takes three arguments:
*
*     1. the color to use in the chase
*     2. the amount of time to wait between frames
*     3. the number of LEDs in each 'chase' group
*     3. the number of chases sequences to perform
*/
void theaterChase(uint32_t color, unsigned long wait, unsigned int groupSize, unsigned int numChases) {
	for (unsigned int chase = 0; chase < numChases; chase++) {
		for (unsigned int pos = 0; pos < groupSize; pos++) {
			strip.clear();  // turn off all LEDs
			for (unsigned int i = pos; i < strip.numPixels(); i += groupSize) {
				strip.setPixelColor(i, color);  // turn on the current group
			}
			strip.show();
			delay(wait);
		}
	}
}

/*
* Simple rainbow animation, iterating through all 8-bit hues. LED color changes
* based on position in the strip. Takes two arguments:
* 
*     1. the amount of time to wait between frames
*     2. the number of rainbows to loop through
*/
void rainbow(unsigned long wait, unsigned int numLoops) {
	for (unsigned int count = 0; count < numLoops; count++) {
		// iterate through all 8-bit hues, using 16-bit values for granularity
		for (unsigned long firstPixelHue = 0; firstPixelHue < 65536; firstPixelHue += 256) {
			for (unsigned int i = 0; i < strip.numPixels(); i++) {
				unsigned long pixelHue = firstPixelHue + (i * 65536UL / strip.numPixels()); // vary LED hue based on position
				strip.setPixelColor(i, strip.gamma32(strip.ColorHSV(pixelHue)));  // assign color, using gamma curve for a more natural look
			}
			strip.show();
			delay(wait);
		}
	}  
}