#include "DHT.h"

#define DHTPIN 2     
#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321
#include <LiquidCrystal.h>

// Cartao
//#include "FS.h"
#include "SD.h"
#include "SPI.h"

#define CS_PIN 4

LiquidCrystal lcd(13, 12, 11, 10, 9, 8);

DHT dht(DHTPIN, DHTTYPE);

void setup() {
  Serial.begin(115200);
  Serial.println(F("DHT22 example!"));
  lcd.begin(16, 2);

  dht.begin();

  if(!SD.begin()){
        Serial.println("Card Mount Failed");
        return;
    }

  //uint8_t cardType = SD.cardType();
}

void loop() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  // Check if any reads failed and exit early (to try again).
  if (isnan(temperature) || isnan(humidity)) {
    Serial.println(F("Failed to read from DHT sensor!"));
    return;
  }

  Serial.print(F("Humidity: "));
  Serial.print(humidity);
  Serial.print(F("%  Temperature: "));
  Serial.print(temperature);
  Serial.println(F("°C "));

  lcd.print("Humd: ");
  lcd.print(humidity);
  lcd.setCursor(0,1);
  lcd.print("Temp: ");
  lcd.print(temperature);
  // Pisca o lcd quando reinicia o loop
  
  delay(6000);
  lcd.clear();

  

  // Wait a few seconds between measurements.
  delay(2000);
}