#include <Adafruit_NeoPixel.h>
/*
Tratto dal sito di Mauro Alfieri
https://www.mauroalfieri.it/elettronica/neopixel-ring-16led-strandtest.html
*/
#define PIN 6
Adafruit_NeoPixel strip = Adafruit_NeoPixel(66, PIN, NEO_GRB + NEO_KHZ800);
// Parameter 1 = number of pixels in strip
// Parameter 2 = Arduino pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB Pixels are wired for GRB bitstream (most NeoPixel products)
// NEO_RGB Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
// IMPORTANT: To reduce NeoPixel burnout risk, add 1000 uF capacitor across
// pixel power leads, add 300 - 500 Ohm resistor on first pixel's data input
// and minimize distance between Arduino and first pixel. Avoid connecting
// on a live circuit...if you must, connect GND first.
void setup()
{
strip.begin();
strip.show(); // Initialize all pixels to 'off'
}
void loop() {
// Sequenze monocolore
colorWipe(strip.Color(255, 0, 0), 30); // Red
colorWipe2(strip.Color(255, 255, 0), 60); // Yelow
colorWipe(strip.Color(0, 255, 0), 30); // Green
colorWipe2(strip.Color(0, 255, 255), 60); // Green
colorWipe(strip.Color(0, 0, 255), 30); // Blue
colorWipe2(strip.Color(255, 0, 255), 60); // Pink
// Tremolii
theaterChase(strip.Color(127, 127, 127), 50); // White
theaterChase(strip.Color(127, 0, 0), 50); // Red
theaterChase(strip.Color(0, 0, 127), 50); // Blue
theaterChase(strip.Color(127, 0, 127), 50); // Pink
theaterChase(strip.Color(127, 127, 0), 50); // Yelow
theaterChaseRainbow(10);
/*
rainbow(20);
rainbowCycle(20);
*/
}
// Fill the dots one after the other with a color
void colorWipe(uint32_t c, uint8_t wait) {
for(uint16_t i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, c);
strip.show();
delay(wait);
}
}
void colorWipe2(uint32_t c, uint8_t wait) {
int n=int(strip.numPixels()/3);
for(uint16_t i=0; i<n; i++) {
strip.setPixelColor(i, c);
strip.setPixelColor(i+n, c);
strip.setPixelColor(i+2*n, c);
strip.show();
delay(wait);
}
}
void rainbow(uint8_t wait) {
uint16_t i, j;
for(j=0; j<256; j++) {
for(i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, Wheel((i+j) & 255));
}
strip.show();
delay(wait);
}
}
// Slightly different, this makes the rainbow equally distributed throughout
void rainbowCycle(uint8_t wait) {
uint16_t i, j;
for(j=0; j<256*5; j++) { // 5 cycles of all colors on wheel
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, Wheel(((i*256/strip.numPixels())+j)&255));
}
strip.show();
delay(wait);
}
}
//Theatre-style crawling lights.
void theaterChase(uint32_t c, uint8_t wait) {
for (int j=0; j<10; j++) { //do 10 cycles of chasing
for (int q=0; q < 3; q++) {
for (int i=0; i < strip.numPixels(); i=i+3) {
strip.setPixelColor(i+q, c); //turn every third pixel on
}
strip.show();
delay(wait);
for (int i=0; i < strip.numPixels(); i=i+3) {
strip.setPixelColor(i+q, 0); //turn every third pixel off
}
}
}
}
//Theatre-style crawling lights with rainbow effect
void theaterChaseRainbow(uint8_t wait) {
for (int j=0; j < 256; j++) { // cycle all 256 colors in the wheel
for (int q=0; q < 3; q++) {
for (int i=0; i < strip.numPixels(); i=i+3) {
//turn every third pixel on
strip.setPixelColor(i+q, Wheel( (i+j) % 255));
}
strip.show();
delay(wait);
for (int i=0; i < strip.numPixels(); i=i+3) {
strip.setPixelColor(i+q, 0); //turn every third pixel off
}
}
}
}
// Input a value 0 to 255 to get a color value.
// The colours are a transition r - g - b - back to r.
uint32_t Wheel(byte WheelPos) {
WheelPos = 255 - WheelPos;
if(WheelPos < 85) {
return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
}
if(WheelPos < 170) {
WheelPos -= 85;
return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
}
WheelPos -= 170;
return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
}
uno:A5.2
uno:A4.2
uno:AREF
uno:GND.1
uno:13
uno:12
uno:11
uno:10
uno:9
uno:8
uno:7
uno:6
uno:5
uno:4
uno:3
uno:2
uno:1
uno:0
uno:IOREF
uno:RESET
uno:3.3V
uno:5V
uno:GND.2
uno:GND.3
uno:VIN
uno:A0
uno:A1
uno:A2
uno:A3
uno:A4
uno:A5
ring1:GND
ring1:VCC
ring1:DIN
ring1:DOUT
ring2:GND
ring2:VCC
ring2:DIN
ring2:DOUT
ring3:GND
ring3:VCC
ring3:DIN
ring3:DOUT
ring4:GND
ring4:VCC
ring4:DIN
ring4:DOUT