#define BLYNK_TEMPLATE_ID "TMPL6vRWx-MBH"
#define BLYNK_TEMPLATE_NAME "LED CONTROL DAN SUHU"
#define BLYNK_AUTH_TOKEN "T5xM27RNdYii5OEYJO2ns86iPVKOw8xX"
#define BLYNK_PRINT Serial

#include <WiFi.h>
#include <BlynkSimpleEsp32.h>
#include <DHTesp.h> //Library untuk DHT

char auth[] = BLYNK_AUTH_TOKEN ; //Auth Token

char ssid[] = "Wokwi-GUEST"; //nama hotspot yang digunakan
char pass[] = ""; //password hotspot yang digunakan

const int DHT_PIN = 15;

int value0, value1, value2, value3, value6;

byte LED_R = 26;
byte LED_Y = 27;
byte LED_G = 14;
byte LED_B = 12;

DHTesp dht;

BlynkTimer timer;

//function untuk pengiriman sensor
void sendSensor(){
 TempAndHumidity  data = dht.getTempAndHumidity();

//menampilkan temperature pada Serial monitor
  Serial.print("Temperature: ");
  Serial.print(data.temperature);
  Serial.println("C ");
  Serial.print("Kelembaban: ");
  Serial.print(data.humidity);
  Serial.println("% ");

//mengirimkan data temperatur ke Virtual pin VO di Blynk Cloud
  Blynk.virtualWrite(V4, data.temperature);
//mengirimkan data kelemaban ke Virtual pin V1 di Blynk Cloud
  Blynk.virtualWrite(V5, data.humidity);
}

BLYNK_WRITE(V0){
  value0 = param.asInt();
  digitalWrite(LED_R, value0);
  Blynk.virtualWrite(V7, value0);
  cekAllLed();
}

BLYNK_WRITE(V1){
  value1 = param.asInt();
  digitalWrite(LED_Y, value1);
  Blynk.virtualWrite(V8, value1);
  cekAllLed();
}

BLYNK_WRITE(V2){
  value2 = param.asInt();
  digitalWrite(LED_G, value2);
  Blynk.virtualWrite(V9, value2);
  cekAllLed();
}

BLYNK_WRITE(V3){
  value3 = param.asInt();
  digitalWrite(LED_B, value3);
  Blynk.virtualWrite(V10, value3);
  cekAllLed();
}

BLYNK_WRITE(V6){
  value6 = param.asInt();

  digitalWrite(LED_R, value6);
  Blynk.virtualWrite(V7, value6);
  Blynk.virtualWrite(V0, value6);
  
  digitalWrite(LED_Y, value6);
  Blynk.virtualWrite(V8, value6);
  Blynk.virtualWrite(V1, value6);

  digitalWrite(LED_G, value6);
  Blynk.virtualWrite(V9, value6);
  Blynk.virtualWrite(V2, value6);

  digitalWrite(LED_B, value6);
  Blynk.virtualWrite(V10, value6);
  Blynk.virtualWrite(V3, value6);
}

void cekAllLed(){
  if(value0 == 1 && value1 == 1 && value2 == 1 && value3 == 1){
    Blynk.virtualWrite(V6, 1);
  }
  else{
    Blynk.virtualWrite(V6, 0);
  }
}

void setup(){
    // Debug console
    Serial.begin(115200);
    dht.setup(DHT_PIN, DHTesp::DHT22);
    pinMode(LED_R, OUTPUT);
    pinMode(LED_Y, OUTPUT);
    pinMode(LED_G, OUTPUT);
    pinMode(LED_B, OUTPUT);

    //memulai Blynk
    Blynk.begin(auth, ssid, pass);
    //Mengaktifkan timer untuk pengiriman data 1000ms
    timer.setInterval(1000, sendSensor);
}


void loop(){
  //menjalankan blynk
  Blynk.run(); 
  //menjalankan timer
  timer.run();
}