/*
* Tiny4kOLED - Drivers for SSD1306 controlled dot matrix OLED/PLED 128x32 displays
*
* Based on ssd1306xled, re-written and extended by Stephen Denne
* from 2017-04-25 at https://github.com/datacute/Tiny4kOLED
*
*/
// Choose your I2C implementation before including Tiny4kOLED.h
// The default is selected is Wire.h
// To use the Wire library:
//#include <Wire.h>
// To use the Adafruit's TinyWireM library:
#include <TinyWireM.h>
// To use the TinyI2C library from https://github.com/technoblogy/tiny-i2c
//#include <TinyI2CMaster.h>
// The blue OLED screen requires a long initialization on power on.
// The code to wait for it to be ready uses 20 bytes of program storage space
// If you are using a white OLED, this can be reclaimed by uncommenting
// the following line (before including Tiny4kOLED.h):
//#define TINY4KOLED_QUICK_BEGIN
#include <Tiny4kOLED.h>
// ============================================================================
void setup() {
// put your setup code here, to run once:
// This example is for a 128x64 screen
oled.begin(128, 64, sizeof(tiny4koled_init_128x64br), tiny4koled_init_128x64br);
// Two rotations are supported,
// The begin() method sets the rotation to 1.
//oled.setRotation(0);
// Some newer devices do not contain an external current reference.
// Older devices may also support using the internal curret reference,
// which provides more consistent brightness across devices.
// The internal current reference can be configured as either low current, or high current.
// Using true as the parameter value choses the high current internal current reference,
// resulting in a brighter display, and a more effective contrast setting.
//oled.setInternalIref(true);
oled.clear();
doubleSize();
oled.on();
}
void loop() {
delay(10000);
}
void doubleSize() {
oled.setFontX2(FONT6X8);
oled.setCursor(0, 0);
oled.println("!\"#$%&'()*");
oled.println("+,-./:;<=>");
oled.println("?@[\\]^_`");
oled.println("{|}~09AZaz");
}