int a=27;
int b=14;
int c=12;
int d=4;
int e=2;
int f=15;
int swit1;
int swit2;
int swit3;
void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(a,OUTPUT);
  pinMode(b,OUTPUT);
  pinMode(c,OUTPUT);
  pinMode(d,OUTPUT);
  pinMode(e,OUTPUT);
  pinMode(f,OUTPUT);
  pinMode(26, INPUT);
  pinMode(25, INPUT);
  pinMode(33, INPUT);
}

void loop()
{
  //digitalWrite(a, HIGH);
  //digitalWrite(d, HIGH);
  //digitalWrite(b, LOW);
  //digitalWrite(c, LOW);
  //digitalWrite(e, LOW);
  //digitalWrite(f, LOW);
  //delay(1000);
  //digitalWrite(b, HIGH);
  //digitalWrite(e, HIGH);
  //digitalWrite(a, LOW);
  //digitalWrite(c, LOW);
  //digitalWrite(d, LOW);
  //digitalWrite(f, LOW);
  //delay(1000);
  //digitalWrite(c, HIGH);
  //digitalWrite(f, HIGH);
  //digitalWrite(a, LOW);
  //digitalWrite(b, LOW);
  //digitalWrite(d, LOW);
  //digitalWrite(e, LOW);
  //delay(1000);
  swit1=digitalRead(26);
  swit2=digitalRead(25);
  swit3=digitalRead(33);
  if(swit1==1)
  {
 // digitalWrite(26, HIGH);
  digitalWrite(a, HIGH);
  digitalWrite(d, HIGH);
  //digitalWrite(b, LOW);
  //digitalWrite(c, LOW);
  //digitalWrite(e, LOW);
  //digitalWrite(f, LOW);
  delay(1000);
  }
  else{
    digitalWrite(a, LOW);
    digitalWrite(d, LOW);
  }
  
  if(swit2==1)
  {
  //digitalWrite(25, HIGH);
  digitalWrite(b, HIGH);
  digitalWrite(e, HIGH);
  //digitalWrite(a, LOW);
  //digitalWrite(c, LOW);
  //digitalWrite(d, LOW);
  //digitalWrite(f, LOW);
  delay(1000);
  }
  else{
    digitalWrite(b, LOW);
    digitalWrite(e, LOW);
  }
  
  if(swit3==1){
  //digitalWrite(33, HIGH);
  digitalWrite(c, HIGH);
  digitalWrite(f, HIGH);
  //digitalWrite(a, LOW);
  //digitalWrite(b, LOW);
  //digitalWrite(d, LOW);
  //digitalWrite(e, LOW);
  delay(1000);
  }
  else{
    digitalWrite(c, LOW);
    digitalWrite(f, LOW);
  }
}