#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET -1    // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C // I2C address of the OLED display

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for (;;)
      ;
  }
  display.display();
  delay(2000);

  display.clearDisplay();

  display.setTextSize(1);
  display.setTextColor(SSD1306_WHITE); // Update with a valid color
  display.setCursor(0, 0);
  display.println(F("Welcome to Medibox!"));
  display.display();
}

void loop() {
  // put your main code here, to run repeatedly:
  delay(1000); // Update with an appropriate delay
}