#include <Wire.h>
#include <LiquidCrystal_I2C.h>

#define TRIGGER_PIN 11
#define ECHO_PIN 12

LiquidCrystal_I2C lcd(0x27, 16, 2); // Cambia la dirección 0x27 por la de tu LCD

void setup() {
  Serial.begin(9600);
  pinMode(TRIGGER_PIN, OUTPUT);
  pinMode(ECHO_PIN, INPUT);
  lcd.init();
  lcd.backlight();
  lcd.setCursor(0, 0);
  lcd.print("Measurer - BBS");
}

void loop() {
  digitalWrite(TRIGGER_PIN, LOW);
  delayMicroseconds(2);
  digitalWrite(TRIGGER_PIN, HIGH);
  delayMicroseconds(10);
  digitalWrite(TRIGGER_PIN, LOW);
  float distance = pulseIn(ECHO_PIN, HIGH);
  distance = distance / 58.0;
  lcd.setCursor(0, 1);
  lcd.print("Estatura: ");
  lcd.print(distance);
  lcd.print(" cm");
  delay(500);
}