/*
 The circuit:
 * LCD RS pin to digital pin 13
 * LCD Enable pin to digital pin 12
 * LCD D4 pin to digital pin 14
 * LCD D5 pin to digital pin 27
 * LCD D6 pin to digital pin 26
 * LCD D7 pin to digital pin 25
 * LCD R/W pin to ground
 * 10K resistor:
 * ends to +5V and ground
 * wiper to LCD VO pin (pin 3)
*/


#include <LiquidCrystal.h>

const int rs = 13, en = 12, d4 = 14, d5 = 27, d6 = 26, d7 = 25;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

void setup() {
  lcd.begin(16, 2);
  lcd.setCursor(0, 0); // set the cursor to (0,0):
  lcd.autoscroll();
  lcd.scrollDisplayLeft();
}

void loop() {
  lcd.print("Arturo ");
  delay(750);
  }