#include "DHTesp.h"

const int DHT_PIN = 15;

DHTesp dhtSensor;
int suhu ; // variable suhu

/*************************************************************

  This sketch shows how to write values to Virtual Pins

  NOTE:
  BlynkTimer provides SimpleTimer functionality:
    http://playground.arduino.cc/Code/SimpleTimer

  App dashboard setup:
    Value Display widget attached to Virtual Pin V5
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID "TMPL63rq_-xca"
#define BLYNK_TEMPLATE_NAME "pengatur suhu"
#define BLYNK_AUTH_TOKEN "4I23Bbd8xS85z7s2EZsMrOvmTJfsQW-5"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

// This function sends Arduino's up time every second to Virtual Pin (5).
// In the app, Widget's reading frequency should be set to PUSH. This means
// that you define how often to send data to Blynk App.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  suhu=data.temperature;
  Blynk.virtualWrite(V1,suhu);
  if(suhu <=14){
    digitalWrite(32, LOW);
    digitalWrite(33, LOW);
    digitalWrite(25, LOW);
  }
  if(suhu >=15 && suhu <=17){
    digitalWrite(32, HIGH);
    digitalWrite(33, LOW);
    digitalWrite(25, LOW);
  }
  if(suhu >=18 && suhu <=20){
    digitalWrite(32, HIGH);
    digitalWrite(33, HIGH);
    digitalWrite(25, LOW);
  }
  if(suhu >=21){
    digitalWrite(32, HIGH);
    digitalWrite(33, HIGH);
    digitalWrite(25, HIGH);
  }
}

void setup()
{
  // Debug console
  Serial.begin(115200);

  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

  // Setup a function to be called every second
  timer.setInterval(1000L, myTimerEvent);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
  pinMode(32, OUTPUT); //sprayer 1
  pinMode(33, OUTPUT); //sprayer 2
  pinMode(25, OUTPUT); //sprayer 3
}

void loop()
{
  Blynk.run();
  timer.run(); // Initiates BlynkTimer
}