#include <HX711.h>

#define LOADCELL_1_DT 11
#define LOADCELL_2_DT 10
#define LOADCELLS_SCK 8

HX711 scale1;
HX711 scale2;

void setup() {
  // put your setup code here, to run once:'
  scale1.begin(LOADCELL_1_DT, LOADCELLS_SCK);
  scale2.begin(LOADCELL_2_DT, LOADCELLS_SCK);
  scale1.set_scale(420);
  // scale1.tare();
  scale2.set_scale(420);
  // scale2.tare();

  Serial.begin(115200);
}

void loop() {
  // put your main code here, to run repeatedly:
  float reading1 = scale1.get_units();
  float reading2 = scale2.get_units();
  Serial.print("Reading 1: ");
  Serial.print(reading1, 3);
  Serial.print(" kg\t");
  Serial.print("Reading 2: ");
  Serial.print(reading2, 3);
  Serial.println(" kg");
  delay(1000);

}