#include <WiFi.h>
#include "PubSubClient.h"
#include <LiquidCrystal_I2C.h>
#include<DHT.h>
#define DHTPIN 15
#define DHTTYPE  DHT22
LiquidCrystal_I2C LCD = LiquidCrystal_I2C(0x27, 16, 2);
DHT dht(DHTPIN,DHTTYPE);
const char * MQTTServer = "broker.emqx.io";
const char * MQTT_Topic = "VLUTE_09/DHT22";

// Tạo ID ngẫu nhiên tại: https://www.guidgen.com/
const char * MQTT_ID = "";
int Port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);

void WIFIConnect() {
  Serial.println("Connecting to SSID: Wokwi-GUEST");
  WiFi.begin("Wokwi-GUEST", "");
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("WiFi connected");
  Serial.print(", IP address: ");
  Serial.println(WiFi.localIP());
}

void MQTT_Reconnect() {
  while (!client.connected()) {
    if (client.connect(MQTT_ID)) {
      Serial.print("MQTT Topic: ");
      Serial.print(MQTT_Topic);
      Serial.print(" connected");
      client.subscribe(MQTT_Topic);
      Serial.println("");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.println(topic);
  Serial.print("Message: ");
  String stMessage;

  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    stMessage += (char)message[i];
  }
  LCD.setCursor(0,0);
  LCD.print(stMessage);
  delay(1000);
}
void setup() {
  Serial.begin(115200);
  dht.begin();
  WIFIConnect();
  LCD.init();
  LCD.backlight();
  client.setServer(MQTTServer, Port);
  client.setCallback(callback);

}

void loop() {
  delay(10);
  ndpushlish();
  if (!client.connected()) {
    MQTT_Reconnect();
  }
  client.loop();
  var t = parseFloat(obj.NhietDo);
 var h = parseFloat(obj.DoAm);
if(h>85){
    Humi = "Độ Ẩm Cao";
 }
 else{
    Humi = "Độ Ẩm Thấp";
 }

 if(t<40){
    Tem = "Nhiệt Độ Thấp";
 }
 else{
    Tem = "Nhiệt Độ Cao";
 }
 document.getElementById("nhietdo").innerHTML = "Nhiệt Độ: "+obj.NhietDo+" Độ C - "+Tem;
 document.getElementById("doam").innerHTML = "Độ Ẩm: "+obj.DoAm+" % - "+Humi;

}



void ndpushlish(){
  float t = dht.readTemperature();
  float h = dht.readHumidity();

  String send = "{\"NhietDo\":\""+String(t)+"\",\"DoAm\":\""+String(h)+"\"}";
  client.publish("VLUTE_09/DHT22",String(send).c_str());
}