#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C lcd(0x27, 16, 2);

int up = 8;
int down = 9;
int right = 10;
int left = 11;
int set =12;
int run =13;
int menu = 1;

void setup() {
  lcd.begin();
  lcd.backlight();
  pinMode(up, INPUT_PULLUP);
  pinMode(down, INPUT_PULLUP);
  pinMode(right, INPUT_PULLUP);
  pinMode(left, INPUT_PULLUP);
  pinMode(set, INPUT_PULLUP);
  pinMode(run, INPUT_PULLUP);
  updateMenu();
}

void loop() {
  if (!digitalRead(up)){
    menu++;
    updateMenu();
    delay(100);
    while (!digitalRead(up));
  }
  if (!digitalRead(down)){
    menu--;
    updateMenu();
    delay(100);
    while(!digitalRead(down));
  }
  if (!digitalRead(selectButton)){
    executeAction();
    updateMenu();
    delay(100);
    while (!digitalRead(selectButton));
  }
}

void updateMenu() {
  switch (menu) {
    case 0:
      menu = 1;
      break;
    case 1:
      lcd.clear();
      lcd.print("Status");
      lcd.setCursor(0, 1);
      lcd.print(" MenuItem2");
      break;
    case 2:
      lcd.clear();
      lcd.print(" MenuItem1");
      lcd.setCursor(0, 1);
      lcd.print(">MenuItem2");
      break;
    case 3:
      lcd.clear();
      lcd.print(">MenuItem3");
      lcd.setCursor(0, 1);
      lcd.print(" MenuItem4");
      break;
    case 4:
      lcd.clear();
      lcd.print(" MenuItem3");
      lcd.setCursor(0, 1);
      lcd.print(">MenuItem4");
      break;
    case 5:
      menu = 4;
      break;
  }
}

void executeAction() {
  switch (menu) {
    case 1:
      action1();
      break;
    case 2:
      action2();
      break;
    case 3:
      action3();
      break;
    case 4:
      action4();
      break;
  }
}

void action1() {
  lcd.clear();
  lcd.print(">Executing #1");
  delay(1500);
}
void action2() {
  lcd.clear();
  lcd.print(">Executing #2");
  delay(1500);
}
void action3() {
  lcd.clear();
  lcd.print(">Executing #3");
  delay(1500);
}
void action4() {
  lcd.clear();
  lcd.print(">Executing #4");
  delay(1500);
}