#include <WiFi.h>//library for wifi
#include <PubSubClient.h>//library for MQtt 



void callback(char* subscribetopic, byte* payload, unsigned int payloadLength); 

//-------credentials of IBM Accounts------

#define ORG "68tgsu"//IBM ORGANITION ID
#define DEVICE_TYPE "gaspipeline"//Device type mentioned in ibm watson IOT Platform
#define DEVICE_ID "7328"//Device ID mentioned in ibm watson IOT Platform
#define TOKEN "732820104010"     //Token
String data3;
int pressure;
int leakage;


//-------- Customise the above values --------
char server[] = ORG ".messaging.internetofthings.ibmcloud.com";// Server Name
char publishTopic[] = "iot-2/evt/Data/fmt/json";// topic name and type of event perform and format in which data to be send
char subscribetopic[] = "iot-2/cmd/command/fmt/String";// cmd  REPRESENT command type AND COMMAND IS TEST OF FORMAT STRING
char authMethod[] = "use-token-auth";// authentication method
char token[] = TOKEN;
char clientId[] = "d:" ORG ":" DEVICE_TYPE ":" DEVICE_ID;//client id


//-----------------------------------------
WiFiClient wifiClient; // creating the instance for wificlient
PubSubClient client(server, 1883, callback ,wifiClient); //calling the predefined client id by passing parameter like server id,portand wificredential



void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println("Hello, ESP32!");
  ledcSetup(0,2000,8);
  ledcAttachPin(12,0);
  wificonnect();
  mqttconnect();
}

void loop() {
  // put your main code here, to run repeatedly:
  pressure=analogRead(34);
  Serial.println(pressure);
  leakage=analogRead(35);
  Serial.println(leakage);
  if(leakage>300){
    ledcWriteTone(0,2000);
  }
  else{
    ledcWrite(0,0);
  }
  
  PublishData(pressure, leakage);
  delay(100);
  if (!client.loop()) {
    mqttconnect();
  }  
}

/*.....................................retrieving to Cloud...............................*/

void PublishData(int press, int leak) {
  mqttconnect();//function call for connecting to ibm
  /*
     creating the String in in form JSon to update the data to ibm cloud
  */
  String payload = "{\"pressure\":";
  payload += press;
  payload += "," "\"leakage\":";
  payload += leak;
  payload += "}";

  
  Serial.print("Sending payload: ");
  Serial.println(payload);

  
  if (client.publish(publishTopic, (char*) payload.c_str())) {
    Serial.println("Publish ok");// if it sucessfully upload data on the cloud then it will print publish ok in Serial monitor or else it will print publish failed
  } else {
    Serial.println("Publish failed");
  }
  
}


void mqttconnect() {
  if (!client.connected()) {
    Serial.print("Reconnecting client to ");
    Serial.println(server);
    while (!!!client.connect(clientId, authMethod, token)) {
      Serial.print(".");
      delay(500);
    }
      
    initManagedDevice();
    Serial.println();
  }
}
void wificonnect() //function defination for wificonnect
{
  Serial.println();
  Serial.print("Connecting to ");

  WiFi.begin("Wokwi-GUEST", "", 6);//passing the wifi credentials to establish the connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void initManagedDevice() {
  if (client.subscribe(subscribetopic)) {
    Serial.println((subscribetopic));
    Serial.println("subscribe to cmd OK");
  } else {
    Serial.println("subscribe to cmd FAILED");
  }
}

void callback(char* subscribetopic, byte* payload, unsigned int payloadLength) 
{
  
  Serial.print("callback invoked for topic: ");
  Serial.println(subscribetopic);
  for (int i = 0; i < payloadLength; i++) {
    //Serial.print((char)payload[i]);
    data3 += (char)payload[i];
  } 
  Serial.println("data: "+ data3); 
  
data3="";  
}