#include <WiFi.h>
#include "PubSubClient.h"
#include <Keypad.h>
const char * MQTTServer = "broker.emqx.io";
const char * MQTT_Topic = "Linh1";

const char * MQTT_ID = "";
int Port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);
const uint8_t ROWS = 4;
const uint8_t COLS = 4;
char keys[ROWS][COLS] = {
  { '1', '2', '3', 'A' },
  { '4', '5', '6', 'B' },
  { '7', '8', '9', 'C' },
  { '*', '0', '#', 'D' }
};

uint8_t colPins[COLS] = { 5, 4, 3, 2 }; // Pins connected to C1, C2, C3, C4
uint8_t rowPins[ROWS] = { 9, 8, 7, 6 }; // Pins connected to R1, R2, R3, R4

Keypad keypad = Keypad(makeKeymap(keys), rowPins, colPins, ROWS, COLS);


void WIFIConnect() {
  Serial.println("Connecting to SSID: Wokwi-GUEST");
  WiFi.begin("Wokwi-GUEST", "");
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("WiFi connected");
  Serial.print(", IP address: ");
  Serial.println(WiFi.localIP());
}

void MQTT_Reconnect() {
  while (!client.connected()) {
    if (client.connect(MQTT_ID)) {
      Serial.print("MQTT Topic: ");
      Serial.print(MQTT_Topic);
      Serial.print(" connected");
      client.subscribe(MQTT_Topic);
      Serial.println("");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.println(topic);
  Serial.print("Message: ");
  String stMessage;

  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    stMessage += (char)message[i];
  }
}

void setup() {
  Serial.begin(115200);

  WIFIConnect();
  client.setServer(MQTTServer, Port);
  client.setCallback(callback);

}

void loop() {
  delay(10);
  if (!client.connected()) {
    MQTT_Reconnect();
    }
  char key = keypad.getKey();

  if (key != NO_KEY) {
    Serial.println(key);
  }
   client.loop();
  
}