// Water Tank Simulation 
// by D.Weerasinghe COTM (Visiting Instruct COTM)
#define pumpRun 2 
#define pumpInd 13 
#define HHLPin 10
#define HLPin 9
#define LLPin 8
#define LLLPin 7
#define OvFlwPin 6
#define clkoutPin 5

#define printTimeout 5000
#define lvlupdatTimeout 5000
#define tankLevelRefresdly 300
#define maxTanklevel 1000
#define lowLevel 0.2 
#define lowlLowLevel 0.1
#define highLevel 0.8
#define highHighLevel 0.9
#define pumpRate 12
#define flowRate 10
#define printPumpState 0 //  1 for true 0 for false
#define graphMode 1 // 0 to enable/view Consumption rate, 1 to disable/hideview consumption rate

//boolean motorStart = false;
//boolean motorStop = false;
boolean pumpRunning = false;
boolean pump_State = false;
boolean overflow = false;
boolean LLL = false;
boolean LL = false;
boolean HL = false;
boolean HHL = false;
boolean clockpulse = false;

int tankLevel = 0;
int tankPrvLevel = 0;
int consumptionRate = 0;
int consumptionvalve =0;
int outflowrate = 0;
int prvConsumpRate = 0;
int pumpflow = 0;
unsigned long printTicks;
unsigned long lvlupdatTicks;
String pumpState = "Pump Stopped";

void setup() {
  // put your setup code here, to run once:
pinMode(pumpRun, INPUT);
pinMode(pumpInd, OUTPUT);

for(int pin=6; pin<11; pin++){
  pinMode(pin, OUTPUT);
}

Serial.begin(9600);


printTicks = millis();
lvlupdatTicks = millis();
}

void loop() {
  // put your main code here, to run repeatedly:
  pump_State = digitalRead(pumpRun);
  consumptionvalve = map(analogRead(A0),0,1023,0,flowRate);
  delay(5);

  if (pump_State == true){
    digitalWrite(pumpInd, HIGH);
    pumpState = "Pump Running";
    if(printPumpState)Serial.println(pumpState);
  }
  else{
    digitalWrite(pumpInd, LOW);
    pumpState = "Pump Stopped";
    if(printPumpState)Serial.println(pumpState);
  }

  if(prvConsumpRate != consumptionRate ){
    prvConsumpRate = consumptionRate; 
    if(!graphMode){
      Serial.print("Consump rate : ");
      Serial.println(consumptionRate);
    } 
    
  }

if(tankPrvLevel != tankLevel ){
  Serial.print("Tank Level : ");
  Serial.println(tankLevel);
  tankPrvLevel = tankLevel;
  
}

if(pump_State) pumpflow = pumpRate;
else pumpflow = 0;

tankLevel += pumpflow;
tankLevel -= consumptionRate;

if(tankLevel > maxTanklevel){
  tankLevel = maxTanklevel;
  overflow = true;
}
else overflow = false;

if(tankLevel < 1){
  tankLevel = 0;
  consumptionRate = 0;
}
else consumptionRate = consumptionvalve;
delay(tankLevelRefresdly); 


  if(millis()-printTicks > printTimeout){

    Serial.println(pumpState);
    printTicks = millis();
  }

  if(millis()-lvlupdatTicks > lvlupdatTimeout){


    Serial.print("Tank Level : ");
    Serial.println(tankLevel);
    lvlupdatTicks = millis();
  }

LLL= false;
LL= false;
HL= false;
HHL= false;



  if (tankLevel > lowlLowLevel*maxTanklevel){
    LLL= true;
    if(tankLevel > lowLevel*maxTanklevel){
      LL= true;
      if(tankLevel > highLevel*maxTanklevel){
        HL= true;
        if(tankLevel > highHighLevel*maxTanklevel){
          HHL= true;

        }
      }
    }
  }
 

digitalWrite(LLLPin,LLL);
digitalWrite(LLPin,LL);
digitalWrite(HLPin,HL);
digitalWrite(HHLPin,HHL);
digitalWrite(OvFlwPin,overflow);

if(clockpulse)
clockpulse = false;
else
clockpulse = true;

digitalWrite(clkoutPin,clockpulse);

}