// Stepper motor on Wokwi!

#include <Stepper.h>

const int stepsPerRevolution = 400;  // change this to fit the number of steps per revolution
// for your motor

// initialize the stepper library on pins 8 through 11:
Stepper myStepper(stepsPerRevolution, 8, 9, 10, 11);

void setup() {
  // set the speed at 60 rpm:
  myStepper.setSpeed(1);
 
}

void loop() {
  // step one revolution  in one direction:
 
  myStepper.step(stepsPerRevolution);
  delay(50);

  
}