/**
   ESP32 + DHT22 Example for Wokwi
   
   https://wokwi.com/arduino/projects/322410731508073042
*/

#include "DHTesp.h"

const int DHT_PIN = 15;

DHTesp dhtSensor;
int suhu;
int kelembaban;
//BLYNK
/*************************************************************

  This sketch shows how to write values to Virtual Pins

  NOTE:
  BlynkTimer provides SimpleTimer functionality:
    http://playground.arduino.cc/Code/SimpleTimer

  App dashboard setup:
    Value Display widget attached to Virtual Pin V5
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID "TMPL6TCExI-2L"
#define BLYNK_TEMPLATE_NAME "MONITORING SUHU"
#define BLYNK_AUTH_TOKEN "67PhgHNcBgMcdSR01VxOmKlJsyO47xO2"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BLYNK_WRITE(V2)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(2,HIGH);} 
else{digitalWrite(2,LOW);}
  // process received value
}
BLYNK_WRITE(V3)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(4,HIGH);} 
else{digitalWrite(4,LOW);}
  // process received value
}
BLYNK_WRITE(V4)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(5,HIGH);} 
else{digitalWrite(5,LOW);}
  // process received value
}
BLYNK_WRITE(V5)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(18,HIGH);} 
else{digitalWrite(18,LOW);}
  // process received value
}
BLYNK_WRITE(V6)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(19,HIGH);} 
else{digitalWrite(19,LOW);}
  // process received value
}
BLYNK_WRITE(V7)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
if(pinValue==1){digitalWrite(21,HIGH);} 
else{digitalWrite(21,LOW);}
  // process received value
}
BlynkTimer timer;

// This function sends Arduino's up time every second to Virtual Pin (5).
// In the app, Widget's reading frequency should be set to PUSH. This means
// that you define how often to send data to Blynk App.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  suhu=data.temperature;
  kelembaban=data.humidity;
  Blynk.virtualWrite(V0,suhu);
  Blynk.virtualWrite(V1,kelembaban);
  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  
}
void setup() {
  pinMode(2,OUTPUT);
  pinMode(4,OUTPUT);
  pinMode(5,OUTPUT);
  pinMode(18,OUTPUT);
  pinMode(19,OUTPUT);
  pinMode(21,OUTPUT);
  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  timer.setInterval(1000L, myTimerEvent);
}

void loop() {
  Blynk.run();
  timer.run(); // Initiates BlynkTimer
}