void setup() {
  // put your setup code here, to run once:
  Serial1.begin(115200);
  Serial1.println("Hello, Raspberry Pi Pico!");
}

static const unsigned char image_ButtonUp_7x4_bits[] U8X8_PROGMEM = {0x08,0x1c,0x3e,0x7f};
static const unsigned char image_ButtonDown_7x4_bits[] U8X8_PROGMEM = {0x7f,0x3e,0x1c,0x08};
static const unsigned char image_ButtonLeft_4x7_bits[] U8X8_PROGMEM = {0x08,0x0c,0x0e,0x0f,0x0e,0x0c,0x08};
static const unsigned char image_ButtonRight_4x7_bits[] U8X8_PROGMEM = {0x01,0x03,0x07,0x0f,0x07,0x03,0x01};


void loop() {
  // put your main code here, to run repeatedly:

  u8g2.setBitmapMode(1);
  u8g2.setFont(u8g2_font_helvB08_tr);
  u8g2.drawStr(47, 9, "Recoil");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(0, 25, "Recoil");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(0, 36, "Test Single Recoil");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(0, 47, "Test Auto Recoil");
  u8g2.drawXBMP( 0, 12, 7, 4, image_ButtonUp_7x4_bits);
  u8g2.drawXBMP( 0, 60, 7, 4, image_ButtonDown_7x4_bits);
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(0, 58, "Number of NeoPixels");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(86, 58, "12 pixels");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(86, 48, "Gun Sight");
  u8g2.drawXBMP( 0, 1, 4, 7, image_ButtonLeft_4x7_bits);
  u8g2.drawXBMP( 124, 0, 4, 7, image_ButtonRight_4x7_bits);
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(86, 25, "On");
  u8g2.setFont(u8g2_font_haxrcorp4089_tr);
  u8g2.drawStr(86, 37, "Off");


  delay(1); // this speeds up the simulation
}