#include <DHTesp.h>
#include <WiFi.h>
#include<ThingSpeak.h>
DHTesp dhtSensor;
TempAndHumidity data;
const int dhtpin=15;


const int echo=4;
const int trig=2;
float distance;
float duration;


char ssid[]="Wokwi-GUEST";
char pass[]="";
WiFiClient client;


unsigned long myChannelNumber= 2257518;
const char* myWriteAPIKey="9XMI9WBGRI4R7CWJ";
int statusCode;


void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(trig, OUTPUT);
  pinMode(echo, INPUT);
  dhtSensor.setup(dhtpin,DHTesp::DHT22);
  WiFi.mode(WIFI_STA);
  ThingSpeak.begin(client);
  delay(1000);
}


float getdistance(){
  digitalWrite(trig, LOW);
  delayMicroseconds(2);
  digitalWrite(trig, HIGH);
  delayMicroseconds(10);
  digitalWrite(trig, LOW);
  duration=pulseIn(echo,HIGH);
  return {duration*0.034/2};
}


void getwifi()
{
  if(WiFi.status()!=WL_CONNECTED)
  {
     Serial.print("Attempting to connect");
     while(WiFi.status()!=WL_CONNECTED)
    {
      WiFi.begin(ssid,pass);
      Serial.print(".");
      delay(5000);
    }
  }
  Serial.println("\nConnected");
}


void loop() {
  getwifi();
  data =dhtSensor.getTempAndHumidity();
  Serial.println("Humi:"+String(data.humidity));
  Serial.println("Temp:"+String(data.temperature));
  distance=getdistance();
  Serial.println("distance:"+String(distance));
  Serial.println("<-------------------->"); // this speeds up the simulation


  ThingSpeak.setField(1,data.humidity);
  ThingSpeak.setField(2,data.temperature);
  ThingSpeak.setField(3,distance);
  statusCode=ThingSpeak.writeFields(myChannelNumber,myWriteAPIKey);


  if(statusCode==200)
  {
    Serial.println("Channel update successful");
  }
  else
  {
    Serial.println("Problem Writing data: HTTp error code:"+String(statusCode));
  }
  delay(15000);
}