#include <WiFi.h>
#include <PubSubClient.h>
#include "EButton.h"


EButton buttons[] = {
  {2, true, 1}, {4, true, 2}, {5, true, 3}};

static char tombol[10] = {0};

//int BUTTON_PIN = D2; //button is connected to GPIO pin D1
// Update these with values suitable for your network.
const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "broker.mqttdashboard.com";
//const char* mqtt_server = "iot.eclipse.org";

WiFiClient espClient;
PubSubClient client(espClient);
long lastMsg = 0;
char msg[50];

void setup_wifi() {
   delay(100);
  // We start by connecting to a WiFi network
    Serial.print("Connecting to ");
    Serial.println(ssid);
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED) 
    {
      delay(500);
      Serial.print(".");
    }
  randomSeed(micros());
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void callback(char* topic, byte* payload, unsigned int length) 
{
  
} //end callback

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) 
  {
    Serial.print("Attempting MQTT connection...");
    // Create a random client ID
    String clientId = "ESP8266Client-";
    clientId += String(random(0xffff), HEX);
    // Attempt to connect
    //if you MQTT broker has clientID,username and password
    //please change following line to    if (client.connect(clientId,userName,passWord))
    if (client.connect(clientId.c_str()))
    {
      Serial.println("connected");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
} //end reconnect()

void setup() {
  Serial.begin(115200);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
  
  for (EButton& btn: buttons) {
    btn.attachSingleClick(sharedClick);
  }

}

void sharedClick(EButton& btn) {
  Serial.println(btn.getID());
  int tombol = btn.getID();
 // char temp[3] = tombol2;
 // client.publish("Emergency/ns1", temp);

  if (tombol == 1){
    char message[] = "1";
    client.publish("Emergency/ns1", message);
    Serial.println (message);
  }
  if (tombol == 2){
    char message[] = "2";
    client.publish("Emergency/ns1", message);
    Serial.println (message);
  }
  
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }

  for (EButton& btn: buttons) {
    btn.tick();
  }

}

/*  client.loop();
  long now = millis();
  int status;
  //每隔0.5s发送一次数据
  if (now - lastMsg > 500) {
     lastMsg = now;
     status=digitalRead(BUTTON_PIN);
     String msg="Button status: ";
     if(status==HIGH )
     {
        msg= msg+ "Pressed";
       char message[58];
       msg.toCharArray(message,58);
       Serial.println(message);
       //publish sensor data to MQTT broker
      client.publish("Emergency/ns1", message);
       }
     else
     {
      msg= msg+ " Not Press";
       char message[58];
       msg.toCharArray(message,58);
       Serial.println(message);
       //publish sensor data to MQTT broker
      client.publish("Emergency/ns1", message);
     }
    }
     
}

*/