#include "DHTesp.h"
#include <LiquidCrystal_I2C.h>
#define LED_PIN    2
#define LED_PIN_MODE    4
const int DHT_PIN = 15;
#define MOTINE_SENSOR 32

DHTesp dhtSensor;
LiquidCrystal_I2C LCD = LiquidCrystal_I2C(0x27, 16, 2);
void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println("Hello, ESP32!");
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
  LCD.init();
  LCD.backlight();
  pinMode(LED_PIN, OUTPUT);
  pinMode(LED_PIN_MODE, OUTPUT);
  pinMode(MOTINE_SENSOR, INPUT);
}

void loop() {
  delay(1000);
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  LCD.setCursor(0, 0);
  LCD.print("Temp: " + String(data.temperature, 2) + "°C");
  LCD.setCursor(0, 1);
  LCD.print("Humidity: " + String(data.humidity, 1) + "%");
  if (data.temperature > 15) {
    digitalWrite(LED_PIN, HIGH);
  }
  else {
    digitalWrite(LED_PIN, LOW);
  }
  int pirState = digitalRead(MOTINE_SENSOR);
  if (pirState == HIGH) {
    digitalWrite(LED_PIN_MODE, HIGH);
  } else {
    digitalWrite(LED_PIN_MODE, LOW);
  }
}