#include<HX711.h>;

const int ld_cell=2;
const int ld_sck=4;

HX711 scale;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println(ld_cell,ld_sck);
}

void loop(){
  if (scale.is_ready())
  {
    Serial.print("Tare_remove_weights...");
  delay(1000);
  scale.tare();
  Serial.println("Tare done...");
  Serial.println("now put weight...");
  delay(1000);
  long reading = scale.get_units(10);
  Serial.println(reading/419.8);

  }
  delay(10);
}